JUNE 17-19, 2024    
WASHINGTON, DC   


Advanced Manufacturing Innovation

Advanced Manufacturing Innovation

Symposium Co-Chairs

Joey MeadJoey Mead
Professor; Director of the Nanomanufacturing Center
University of Massachusetts, Lowell

Chris MenzelChris Menzel
Founder
Chris Menzel Engineering Design

 

Key Speakers

Divya PanchanathanManufacture in Space: A New Era of Advanced Materials Innovation
Divya Panchanathan
Business Development Manager, In-Space Manufacturing, Axiom Space

Nicole WagnerCharacterization of Protein-based Artificial Retina Thin Films Produced via Layer-by-Layer Assembly on the International Space Station
Nicole Wagner
CEO, Lambda Vision

Curtis HillCurtis Hill
Senior Materials Engineer
NASA

Amolak BadeshaIn-Space Manufacturing of Antennas for Global Scale Communications and Energy
Amolak Badesha
CEO, Orbital Composites

Amrit DeZBLAN in Space: Comparing Phase Transitions in Microgravity versus Earth’s Gravity
Amrit De
CEO, Apsidal

S. Sita SontyAutomation Unearthed: The Future of Manufacturing
S. Sita Sonty
CEO, Space Tango

 

Advanced manufacturing enables transfer of science and technology into new products and processes. It is particularly pertinent for technologically complex products and for the commercialization of advanced materials such as those highlighted at TechConnect World. This symposium focuses on challenges and success stories in technology development and highlights exciting new approaches to solving manufacturing challenges.

 
Back to Top ↑

2024 Symposium Sessions

Monday June 17

1:00Space Enabled Biological Products
1:30Advanced Manufacturing of Materials
2:30Space Enabled Materials & Hardware Products
3:30AI-Accelerated Materials Design and Deployment Town Hall - Materials Genome Initiative (MGI)
4:00Advanced Manufacturing - Posters

Tuesday June 18

9:15Advanced Manufacturing Innovation
9:15Space Based Product Development & Experimentation Platforms
10:30Impact in Advanced Manufacturing for LEO - Panel
11:15Revolutionizing Industry with Space Manufacturing
1:00Space Based Manufacturing Systems & Technologies
2:30Fabrication Processes for Space

Wednesday June 19

9:00InSpace Infrastructure Fabrication

2024 Symposium Program

Monday June 17

1:00Space Enabled Biological ProductsAnnapolis 1-2
Session chair: Jonathan Jakischa, TechConnect ATI, US
Characterization of Protein-based Artificial Retina Thin Films Produced via Layer-by-Layer Assembly on the International Space Station
N.L. Wagner, D. Sylva, H. Sylva, K. Dixit, J.A. Greco, LambdaVision, US
In-Space Expansion of Hematopoietic Stem Cells: Technical Progress, Economic Potential, and Commercialization Challenges
L. Stodieck, S. Countryman, F. Karouia, T. Niederwieser, P. Huang, A. Zubair, L. Helander, B. Freed, BioServe Space Technologies, US
Biomanufacturing Tissue and Cells in Microgravity
M. Mulligan, K. Savin, A. Rogers, Redwire, US
A review of organoid production in microgravity
R. Roettgen, Prometheus Life Technologies AG, CH
1:30Advanced Manufacturing of MaterialsChesapeake 1
Session chair: William "Cy" Wilson, NASA, US
Advancements in quantum material science and engineering technology to reprogram molecules.
D. Hogan, Spin Q Biophysics, Inc., US
Investigating the Corrosion Behavior and Mechanism of Aluminum Covetics Fabricated with Laser-Induced Graphene
M.A. Khan, D.E.C. Lobo, P. Kang, George Mason University, US
A New Solid-state Diffusion Welding Method for Fe- and Ni- based Superalloys
J.-B. Hwang, E.-S. Kim, Korea Atomic Energy Research Institute, KR
Electrospinning in Industry: Versatile and Scalable Nanomaterials Production
H.A. Lacy, R.K. Tindell, L. Gray, F.J. Chaparro, Nanoscience Instruments, US
2:30Space Enabled Materials & Hardware ProductsAnnapolis 1-2
Session chair: Chris Menzel, Menzel Engineering Design, US
Microgravity 101: Understanding the Significance of In-Space Manufacturing
J.J. Frick, J. Janowitz, Astral Materials, US
ZBLAN in Space: Comparing Phase Transitions in Microgravity versus Earth’s Gravity
A. De, Apsidal, US
In-Space Production of MoS2 Films for Next-Generation Electronics
D.J. Niedzwiecki, Goeppert LLC, US
LEO – A New Technology Platform – Leveraging Low Earth Orbit for Advanced Materials Research and Manufacturing
G.B. Rodrigue, M. Shumbera, J.M. Smith, Allbright Consulting, US
Revolutionizing Space Manufacturing: Sharing Insights from the Breakthroughs in Optical Glass Fabrication from ISS
M. Vestel, Flawless Photonics Inc., US
3:30AI-Accelerated Materials Design and Deployment Town Hall - Materials Genome Initiative (MGI)Annapolis 3-4
Artificial intelligence (AI) has the potential to revolutionize the way we design, develop, and deploy new materials. This town hall will bring together industry leaders to discuss priorities and strategies for harnessing AI to accelerate materials innovation. Join us for a lively discussion on topics such as autonomous R&D, AI-enabled exploration of the vast materials design space, and opportunities for collaboration among industry, government, and academia.
Session chair: Lisa E. Friedersdorf, Office of Science and Technology Policy, US
Moderator
B. Segal, Lockheed Martin, US
Panelist
L. Lee, IBM Research (Zürich), CH
Panelist
S. Arturo, Dow, US
Panelist
C. Boswell-Koller, National Science Foundation, US
Panelist
E. Breckenfeld, NVIDIA, US
4:00Advanced Manufacturing - PostersExpo Hall BC
Microscopic investigation of evolution of micro-crack in tight radius bending with advanced high strength steels
K. Jeong, Y. Jeong, J. Lee, G. Kim, J. Yoon, Hanyang University, KR
Gaining Visibility Into Discrete Manufacturing Processes With MQTT and Sparkplug
R. Subramanyan, HiveMQ, US
Additive Manufacturing of Polymer/Nanoparticle Composites for Diverse Applications
D. Patil, T. Sobczak, K. Song, UGA, US
A digital twin model of ceramic powder manufacturing process using computer simulation and machine learning
J. Park, B. Kim, G-A. Ryu, H.S. Jang, S. Hyun, S. Baik, Korea Institute of Ceramic Engineering and Technology, KR
Modular Pilot & Demonstration Systems - Accelerating the Global Transition to Clean Energy
M. Villegas, Koch Modular Process Systems, US
Electron Beam and Laser Welding to Support On-Orbit Servicing, Assembly, and Manufacturing
B. Panton, W. McAuley, A. Brimmer, E. Choi, A. Ramirez, The Ohio State University, US
Laser beam welding of 316L under low atmospheric pressure for simulation of space welding conditions
A. Brimmer, E. Choi, W. McAuley, B. Panton, A. Ramirez, The Ohio State University, US
300mm Silicon-on-Insulator Technology for Radiation Hard Defense Applications
J.U. Lee, University at Albany-SUNY and RadBOX Semi, Inc., US

Tuesday June 18

9:15Advanced Manufacturing InnovationChesapeake 1
Session chair: Slade Gardner, Big Metal Additive, US
Optimizing Graphene-Metal Composites Manufacturing Through Laser Photothermal Processing Modeling and Computation
D. Espinoza, D. Coren, D. Colmanarez, P. Kang, M.A. Khan, George Mason University, US
AI-assisted feedback to sheet metal stamping processes for automotive applications
W. Halsey, D. Pokkalla, V. Paquit, R. Davies, L. Huang, A. Ilinich, W. Wu, K. Murali, L. Huang, K. Kannan, K. Li, S. Dev, S. Kim, Oak Ridge National Laboratory, US
Quantum Cyber Trust Anchor: Authenticating and Tracking Physical Components
M. Maasberg, I. Taylor, L.G. Butler, U.S. Naval Academy, US
Defect Detection in ISC Cylinder Using Spoof Plasmon Polaritons
W. Wilson, E. Tucker, NASA Langley Research Center, US
The Electronic Alchemy eforge: An Innovation in the Multi-material 3D Printing of Functional Electronics
C.M. Glenn, W. Chan, M. Whitely, L. Lassiter, Morningbird Space, US
Digital Manufacturing for Production: Exploring Applications from Copper to Crowns
M. Strobel, Quantica, DE
9:15Space Based Product Development & Experimentation PlatformsAnnapolis 1-2
Session chair: Chris Menzel, Menzel Engineering Design, US
Manufacture in Space: A New Era of Advanced Materials Innovation
D. Panchanathan, Axiom Space, US
The Fabrication Laboratory (FabLab) facility for exploration missions.
K.A. Savin, Redwire, US
Optimizing Space Manufacturing: The Crucial Role of AI/ML in Design and Process Automation
I. Cozmuta, G-Space, Inc., US
10:30Impact in Advanced Manufacturing for LEO - PanelAnnapolis 1-2
Session chair: Curtis Hill, NASA Materials & Processes Laboratory, US
Panelist
A. De, Apsidal, US
Panelist
P. Dutta, United Semiconductor, US
Panelist
R. Hernandez, ISS National Laboratory, US
Panelist
M. Mulligan, Redwire, US
Panelist
D. Panchanathan, Axiom Space, US
Panelist
A. Wilson, Butler University, US
11:15Revolutionizing Industry with Space ManufacturingAnnapolis 1-2
Session chair: Ioana Cozmuta, G-SPACE, US
Panelist
L. Cromley, Deloitte Consulting, US
Panelist
P. Dutta, United Semiconductors, US
Panelist
H. Mills, Rhodium Scientific, US
Panelist
F. Karouia, BioServe Space Technologies, US
Panelist
J. Scoccimerra, Interstellar Lab, US
1:00Space Based Manufacturing Systems & TechnologiesAnnapolis 1-2
Session chair: Zack Smith, Advanced Technology International (ATI)
Perspectives on United States Standards Development and Industry Engagement for ISAM
D. Poster, U.S. Department of Commerce, US
Operating a Manufacturing Facility in Space; Verification, Validation, and Product Signoff
R. Rughani, N. Gladden, D.A. Barnhart, Arkisys, US
Manufacturing Better Drugs in Space
K. Savin, M. Mulligan, S. Tuma, Redwire, US
On-Demand Manufacturing of Electronics for Next-Generation Semiconductor Devices
M. Seol, NASA Ames, US
2:30Fabrication Processes for SpaceAnnapolis 1-2
Session chair: Chris Menzel, Menzel Engineering Design, US
Enabling Metal Joining & Additive Manufacturing for On-Orbit Assembly and Manufacturing: Metal AM using Vibrational Resonance In-space via Cold-welding (MAVRIC)
K. Hsu, Arizona State University, US
Solid State Metal 3D Printing for Space
P. Bahn, M. Norfolk, Fabrisonic LLC, US
Laser Beam Welding for in-Space Joining Demonstrated Under Vacuum on the Ground and By Parabolic Flight Experiments
E. Choi, A. Brimmer, W. McAuley, B. Panton, A. Ramirez, W. Evans, A. O'Connor, Z. Courtright, J.W. Sowards, NASA/MSFC, US
Volumetric Additive Manufacturing for In-Space Manufacturing
T. Waddell, UC-Berkeley, US

Wednesday June 19

9:00InSpace Infrastructure FabricationAnnapolis 1-2
Session chair: Chris Menzel, Menzel Engineering Design, US
In-Space Manufacturing of Antennas for Global Scale Communications and Energy
A. Badesha, C. Nielsen, D. Stevens, Orbital Composites, US
Near room temperature production of segregated network composites of carbon nanotubes and regolith as multifunctional, building materials in space
J.R. Garcia, E. Caffrey, L. Doolan, D.V. Horvath, T. Carey, C. Gabbett, J.N. Coleman, Trinity College Dublin, IE
Radiation Shielding Boron Nitride Nanotube (BNNT) Reinforced Metal Matrix Composites
C. Chidiac, T. Dolmetsch, Thaero LLC, US
In-situ production of silicon carbide (SiC) from Lunar and Martian regolith
S.K. Nithya Srimurugan, S. Sathyan, Indian Institute of Technology Madras, IN
Spaceflight Qualification of Additive Aluminum
S. Gardner, Big Metal Additive, US
Topics & Application Areas
  • New Industrial Platform Technologies
  • Novel Nanoscale Device Fabrication
  • Innovations in Scalable Nanomanufacturing Techniques
  • Lightweight & Modern Metals
  • Composites Manufacturing
  • Digital Manufacturing & Design Innovation
  • Industry 4.0: Automation & Data Exchange in Manufacturing
  • Smart Factories
  • Sustainable & Green Processes
  • Inkjet Design, Materials & Fabrication
  • Environmental, Health & Safety
  • Circular economy, Green chemistry & engineering, Sustainable materials
  • Other
 

Sponsor & Exhibitor Opportunities
 

To receive announcements and news, please join our mailing list.

Click here to add this event to your calendar.
..  
 
2024 SPONSORS & PARTNERS
Sponsors & Partners
 
2024 SBIR/STTR AGENCY PARTNERS
SBIR/STTR Agency Partners