Materials for Sustainability & Efficiency

Materials for Sustainability and Efficiency

Symposium Chair

Fiona Case
Program Chair
TechConnect

Symposium Sessions
	Monday June 17
10:30	ISO 14034 Environmental Technology Verification (Presented by VerifiGlobal and Southern Research)
1:30	Carbon Capture & Utilization
	Tuesday June 18
10:30	Packaging Materials Innovation
10:30	Energy/Sustainability Innovation Spotlights: Alytic, Navy, Novartis
1:30	Water Technologies
4:00	Materials for Sustainability & Efficiency: Posters
	Wednesday June 19
8:30	Sustainability Fireside Chat
10:30	Biofuels & Bioproducts
1:30	Materials for Personal/Home Care & Cosmetics
1:30	Nano & Microfibrillated Cellulose

Symposium Program
	Monday June 17

10:30	ISO 14034 Environmental Technology Verification (Presented by VerifiGlobal and Southern Research)	205
	Introduction to ISO 14034 and its Benefits T. Hansen, Southern Research, US
	ISO 14034 Process Requirements T. Bruun, VerifiGlobal, DK
	Advanced Septic System Nitrogen Sensor Challenge M. Theroux, US EPA, US
	Advanced Septic System Nitrogen Sensor Challenge G. DeRuzzo, Battelle, US
	Performance Verification of Stormwater Technologies G. Williams, Good Harbour Laboratories, CA
	Performance Verification of Stormwater Technologies D. Scott, Hydro International, US

1:30	Carbon Capture & Utilization	205
	Session chair: Elizabeth Burton, California Institute for Energy and Environment, US; Ron Munson, Cogentiv Solutions LLC, US
1:30	Faradaic Electro-Swing Reactive Adsorption for Carbon Capture S. Voskian, T.A. Hatton, MIT, US
1:55	An Overview of DOE’s Office of Fossil Energy Carbon Capture Program and Carbon Use and Reuse Program Activities B. Anderson, U.S. Department of Energy, US
2:20	Progress Towards Large Capture Pilots in Illinois K. O’Brien, Illinois Sustainable Technology Center (ISTC), US
2:45	Understanding the Contribution of Upstream CO2 Sources to the Total Life Cycle Impacts of Algae Biofuels A.K. Pegallapati, M. Krynock, M. Mutchek, G. Cooney, T. Skone, E. Dale, E. Shuster, Contractor to the National Energy Technology Laboratory, US
3:05	Integrated Process of CO2 Capture and Conversion to Alkyl Carbonates C.B. Panchal, R. Doctor, E3Tec Service, LLC, US
3:25	Pilot Scale Demonstration of Carbon Utilization Technologies for the NRG COSIA Carbon XPrize T. Hansen, K. McCabe, W. Chatterton, M. Leitch, Southern Research, US
	Tuesday June 18

10:30	Packaging Materials Innovation	201
	Session chair: YuanQiao Rao, The Dow Chemical Company, US; Johan Pluyter, Pluyter Consulting, LLC
10:30	Vibration Assisted Injection Molding for PLA with Enhanced Mechanical Properties and Reduced Cycle Time P. GAO, A. Duhduh, A. Kundu, J. Coulter, Lehigh University, US
10:50	Novel Nanosilica - latex Polymer Dispersion Composites and Their Beneficial Environmental Application in Water Barrier Coatings for Paper-based Packaging J.H. Johnston, B. Mesic, M.J. Cairns, Victoria University of Wellington, NZ
11:10	Gas Barrier Enhancement via Multilayered Thermoplastic Polymer/Fluorophosphate Glass Composites D. Vennerberg, Bemis Company, Inc., US
11:30	Closed Loop Circular Economy Approach for Oil- and Water-Resistant Paper Products M. Rabnawaz, Michgian State University, US

10:30	Energy/Sustainability Innovation Spotlights: Alytic, Navy, Novartis	305
	Session chair: Jennifer Rocha, TechConnect, US
10:30	Novartis Business Services J. Goudreau, Novartis Business Services, US
10:45	Photovoltaic Devices Based on Guided Nanowire Arrays R. Kreizman, Yeda Research & Development Co. Ltd., IL
10:52	A Renewable Hydrogen Production Technology Using Waste as Feedstock A. Borole, Electro-Active Techologies, LLC, US
10:59	Transforming Organic Waste into Renewable Energy Solutions R. Sullivan, ITility, LLC, US
11:06	Rationally Designed, Nanoarchitectured Catalyst S. Liu, Metalmark Innovations, Inc., US
11:13	Recyclable fabrics for passive personal thermoregulation S. Boriskina, Massachusetts Institute of Technology, US
11:20	Process to Improve Lithium Ion Battery Life and Capacity L. Micek, University of Minnesota - Technology Commercialization, US
11:27	“Green” Base Oils for Environmentally Acceptable Lubricants L. DiNetta, RiKarbon, Inc., US
11:34	Acid-free Dissolution Recycling of Rare Earth Elements and Cobalt Krennrich, Critical Materials Institute, An Energy Innovation Hub, US
	Review Panelist J. Goudreau, Novartis Business Services, US
	Review Panelist R. Roley, USINDOPACOM, US
	Review Panelist N. Rao, US Small Business Administration, US
	Review Panelist S. Stella, Electric Power Research Institute (EPRI), US

1:30	Water Technologies	205
	Session chair: Steven Jons, DuPont, US; Jeffrey McCutcheon, University of Connecticut, US
1:30	Redox-Mediated Electrosorption for Chemical and Environmental Separations X. Su, X. Mao, Y. Ren, K-J Tan, T.A. Hatton, MIT, US
1:55	Novel Electron Beam Technology for Water Treatment C.A. Cooper, S. Grdanovska, A. Cox, G. Rijal, K. Patel, K. Kumar, Fermi National Accelerator Lab, US
2:15	Resin wafer electrodeionization for the removal of weakly ionized species: silica and ammonia Y.J. Lin, L. Valentino, Argonne National Laboratory, US
2:35	Development of cross-linked bio-based flocculants for the removal of colloidal suspensions M. Essandoh, R.A. Garcia, C.M. Nieman, United States Department of Agriculture, US

4:00	Materials for Sustainability & Efficiency: Posters	Hall C
	Cotton Aerogel D.H. Minh, National University of Singapore, SG
	Sustainable Aerogels from Spent Coffee Grounds D.H. Minh, National University of Singapore, SG
	Wearable solar thermoelectric generator driven by unprecedentedly high temperature difference K-J Choi, UNIST, KR
	NEAT method for high-quality, low-cost gallium nitride wafers T. Hashimoto, E. Letts, D. Key, SixPoint Materials, Inc., US
	Enhancement of optical properties of Perovskite solar cells through added plasmonic nanostructures N. Shehata, H. Badran, I. Kandas, A. Hajjiah, Kuwait College of Science and Technology, KW
	Sustainability depend on efficient break from Oil as fuel J. Barlow, Power Alternative, US
	Wednesday June 19

8:30	Sustainability Fireside Chat	306
	Session chair: Fiona Case, TechConnect, US
	The thesis for this session is that while there are certainly political issues, some of the major factors limiting adoption of sustainable materials technologies are technical - limitations in materials and manufacturing. These are challenges which the TechConnect community could plausibly solve. Bring your questions and ideas and join our eminent panel of thought-leaders as we discuss what exists, and what is needed, to save the world.
	I. Gyuk, U.S. Department of Energy, US
	C. Agapakis, Ginkgo Bioworks, US
	S. Jons, DuPont, US
	A. Hatton, MIT, US
	Y.Q. Rao, The Dow Chemical Company, US

10:30	Biofuels & Bioproducts	301
	Session chair: Rebecca Locker, Modern Meadow, US
10:30	Systems analysis of biofuel pathways for the transport sector – interactions with the evolving grid D.S. Mallapragada, MIT Energy Initiative, US
10:55	Renewable Hydrogen from Biomass for Production of Green Fuels and Chemicals AP. Borole, AJ. Lewis, Electro-Active Techologies, LLC, US
11:15	BTMO Catalyzed Hydrothermal Liquefaction of Lignocellulosic Biomass V. Amar, A. Shende, R. Shende, South Dakota School of Mines and Technology, US
11:35	Cost-effective production of cellulosic ethanol from sweet sorghum stalks via the integration of advanced solid-state fermentation and alkali-distillation S. Li, Tsinghua University, CN
11:55	Bioproducts and Biofuels from High Organic Strength Wastewater and Organic Solid Waste M. Urgun-Demirtas, H. Wu, D. Demro, S.A. Flores, Argonne National Laboratory, US
12:15	High throughput compact membrane filter for micro-algal harvesting W. Liu, Molecule Works Inc., US

1:30	Materials for Personal/Home Care & Cosmetics	301
	Session chair: YuanQiao Rao, The Dow Chemical Company, US; Johan Pluyter, Pluyter Consulting, LLC, US
1:30	Formulation Design of Biosurfactant and Biopolymer Based Personal Care Products S. Amin, Manhattan College, US
1:55	Innovations for Personal Care and Cosmetics R. Gross, Rensselaer Polytechnic Institute, US
2:20	Yeast Cell Wall Particle Encapsulation of Pro-Terpene Payloads E. Soto, F. Rus, G. Ostroff, University of Massachusetts Medical School, US
2:40	Production of Nano-emulsions at Relevant Industrial Rates: Use of Innovative Scale-up Strategies T. Panagiotou, R.J. Fisher, Delphi Scientific, LLC, US
3:00	Game-Changing Odor Elimination Technology for Retail, Textile, and Industrial Applications P. Sander, UltraTech, US

1:30	Nano & Microfibrillated Cellulose	303
	Session chair: Sean Ireland, Fiberlean Technologies Ltd, US
1:30	Water-based esterification and processing of cellulose nanofibrils with polylactic acid for packaging films N.M. Stark, R.C. Sabo, L.M. Matuana R.A. Lafia-Araga, U.S. Forest Service, US
1:55	Eco- and health-friendly gypsum board substitute based on cellulose nanofibrils (CNF) as a binder I. Hafez, M. Tajvidi, University of Maine, US
2:15	Mineral/ microfibrillated cellulose composite materials: Engineered minerals and product forms D. Skuse, Y. Jin, S. Ireland, FiberLean Technologies Limited, UK
2:35	Impact of colloidal stability on cellulose nanocrystals self-ordering in thin films C. Bruel, J.R. Tavares, P.J. Carreau, M.-C. Heuzey, Polytechnique Montreal, CA
2:55	Cellulose Nanocrystals based lubricants D. Grecov, M.J. Shariatzadeh, University of British Columbia, CA
3:15	Low-cost adsorbent for water purification M. Li, Y. Boluk, M.G. El-Din, University of Alberta, CA
3:35	Working with Cellulose Nanomaterials – Preparing a risk-based practical handling guidance S. Clancy, Vireo Associates, US

A concern for the environment, regulatory pressure, and recognition of consumer preferences for products with reduced carbon footprint, are driving innovation in materials development towards more sustainable and efficient products and processes. Submit your abstract and participate in this special symposium highlighting international research and development efforts and success stories in the development of a more sustainable future.