TechConnect World 2020
Co-Located with Nanotech 2020Co-Located with Nanotech 2020 SBIR/STTRSBIR/STTR AI TechConnectAI TechConnect
 

TechConnect World 2020 Program - Wednesday July 1

8:30Sustainable Materials Fireside Chat
Session chair: Fiona Case, TechConnect, US
8:30Advanced Materials & Manufacturing Keynotes
Converting Nanoparticles into Functional Materials
P. Bishop, Johnson Matthey Technology Centre, UK
Flash Graphene
J. Tour, Rice University, US
Sustainably Produced Nano-structured Calcium Silicate (CaSil) - A Versatile Material and its Industrial and Environmental Remediation Applications
J.H. Johnston, Victoria University of Wellington, NZ
Nanomanufacturing Research, Advanced Manufacturing Program and Funding Opportunities at NSF
K. Cooper, National Science Foundation, US
8:30Electronics and Devices Keynote
Industrial Photonic Sensing Systems
L. Tsakalakos, GE Global Research, US
Revolutionizing sensing using quantum technologies
B. Young, AOSense, Inc., US
Monolayer electrolyte for all-solid-state non-volatile memory
S. Fullerton, University of Pittsburgh, US
10:30Bio-based Materials
Session chair: Rebecca Locker, Modern Meadow, US
TBA
C. Dimmler, Checkerspot, Inc., US
Poly-γ-Glutamic Acid: A Green Alternative to Sodium Polyacrylate for Superabsorbents
C. Peng, Ecovia Renewables Inc., US
Integrated Economic and Environmental Sustainability Analysis of Guar Gum
J.C. Quinn, H.M. Summers, E. Sproul, C. Seavert, J. Robbs, S. Khanal, V. Mealing, A.E. Landis, N. Fan, O. Sun, Colorado State University, US
TBA
N. Rorrer, National Renewable Energy Laboratory, US
Cellulose Based Eco-foam
P. Wang, X. Zhang, Washington State University, US
Vibration Assisted Injection Molding: An Innovative Energy Efficient Processing Technique for Poly-Lactic Acid (PLA) with Enhanced Properties
P. Gao, A. Duhduh, A. Kundu, J. Xing, J.P. Coulter, Lehigh University, US
10:30Carbon Nanotube Processing
Session chair: Wolfgang S. Bacsa, University of Toulouse, France
Determining SWCNT Extraction Conditions in Aqueous Two-Polymer Phase Extraction with Near-Infrared Fluorescence
C.M. Sims, J.A. Fagan, National Institute of Standards and Technology, US
Macroscopically Aligned Carbon Nanotubes for Efficient Thermophotovoltaic Energy Conversion
C.F. Doiron, W. Gao, X. Li, J. Kono, G.V. Naik, Rice University, US
Dynamic chemical vapor deposition of carbon nanotubes: toward tailoring nucleation density and collective catalyst deactivation
J. Lee, M. Abdulhafez, G. Tomaraei, M. Bedewy, University of Pittsburgh, US
A new category of CNT-Carbon hybrid materials for energy storage applications
R. Prada Silvy, CHASM Advanced Materials, US
Manufacturing of Ultra-thin, free-standing CNT membranes
M. Dias Lima, LINTEC of America, US
10:30Composite Materials by Design
Session chair: Xindi Yu, The Dow Chemical Company, US
Tuning Nanoparticle Dispersion in Polymer Hosts and their Consequences on Properties
S.K. Kumar, Columbia University, US
Optimizing the mechanical performance of HDPE and dendrimer-like silica nanospheres nanocomposites through in-situ polymerization
D.M. Cecílio, A. Fernandes, J.P. Lourenço, M.L. Cerrada, T. Mckenna, M. Rosário Ribeiro, Instituto Superior Técnico -IST, Universidade de Lisboa, PT
Deep material network for creating process-guided multiscale database of short fiber reinforced composites
Z. Liu, Livermore Software Technology, an ANSYS company, US
Polymer Composites with High Nanoparticle Alignment for Mechanical Enhancement and Functional Versatility
K. Song, W. Xu, S. Jambhulkar, Arizona State University Polytechnic, US
Epoxy-based Nanocomposites with Transition Metal Carbides (MXenes)
C.B. Hatter, Y. Gogotsi, Drexel University, US
10:30Nanoparticle Synthesis & Manufacturing Innovation
Session chair: Jan-Steffen Niehaus, Fraunhofer-Center for Applied Nanotechnology, Germany
Flame-based Aerosol Synthesis of Metal Nanoparticles and Supported-Metal Nanostructures
M. Swihart, University at Buffalo, SUNY, US
Multi-dimensional quantum materials: From Dots to Rods, Sheets and Giant Shell Particles
S. Krohn, H. Schlicke, T. Jochum, J. Niehaus, Fraunhofer CAN, DE
Probing nanoparticle heterogeneity from products to byproducts
S. Stavis, National Institute of Standards & Technology, US
Monodispersed Pt alloy nanoparticles for fuel cell: from discovery to scale up
R. Wang, K. Pupek, T. Dzwiniel, H. Lv, N. Becknell, P. Papa Lopes, P.F.B. Dias Martins, N. Markovic, V. Stamenkovic, Argonne National Laboratory, US
Large scale Manufacturing of Calcium Phosphate Nanoparticles for Medical Applications
T. Panagiotou, Delphi Scientific, LLC, US
Nanozirconia for refractive index enhancement
N. Reinhardt, A. Venier, M. Comesana-Hermo, E. Camposilvan, J. Alberici, Mathym, FR
10:30Bioadhesives & Biocoatings
Session chair: Jeannine M. Coburn, Worcester Polytechnic Institute, US
Antibacterial titanium dioxide coatings for joint prosthesis
A. D’Agostino, P. Tarsini, G. Candiani, R. Chiesa, L. De Nardo, Polytechnic University of Milan, IT
Chemically Defined and Tailorable Synthetic Materials for Human Cell Manufacturing
J.D. Krutty, University of Wisconsin-Madison, US
Doped zirconia mesoporous coatings for biomedical applications
A. D’Agostino, F. Tana, S. Cometa, E. De Giglio, A. Cochis, L. Rimondini, R. Chiesa, L. De Nardo, Polytechnic University of Milan, IT
Tissue Adhesive Tape for Instant Surgical-Strength Sealing of Wet Tissues
H. Yuk, C.S. Nabzdyk, X. Zhao, Massachusetts Institute of Technology, US
Bioionic Liquid Conjugation as Universal Approach To Engineer Hemostatic Bioadhesives
V. Krishnadoss, B. Kanjilal, T. Hannah, A. Masoumi, J. Leijten, I. Noshadi, Rowan University, US
Utilizing Plasma Technology to Improve Cellular Adhesion and Antimicrobial Properties of Hydroxyapatite Nanoparticles
V. Hembrick-Holloman, V.K. Rangari, T. Samuel, S. Jeelani, Tuskegee University, US
10:30Carbon Capture & Utilization
Session chair: Ron Munson, Cogentiv Solutions LLC, US
Moving beyond the Prometheus paradigm in the utilization of carbon containing resources
V. Manousiouthakis, University of California, Los Angeles, US
Using Waste Carbon Feedstocks to Produce Chemicals
E. Nesbitt, U.S. International Trade Commission, US
An overview of DOE Fossil Energy's Carbon Utilization R&D program
A. Kumar, U.S. Department of Energy, US
TBA
E. Burton, California Institute for Energy and Environment, UC Berkeley, US
Life Cycle Analysis Tools for Evaluating the Environmental Footprint of Carbon Utilization Projects
G. Cooney, T. Skone, M. Mutchek, U.S. Department of Energy, US
10:30Novel Storage Technologies
Session chair: Imre Gyuk, U.S. Department of Energy
Pressurised regenerative calcium cycle for utility scale energy storage: pilot-scale demonstration of carbonation cycle
A. Maddocks, The University of Newcastle, AU
Thermal Energy Storage and Integration Methods for Grid-Scale Electric Energy Storage
Z. Ma, P. Davenport, J. Martinek, J. McTigue, C. Turchi, National Renewable Energy Laboratory, US
Power Characterization of Ground-Level Integrated Diverse Energy Storage (GLIDES) Technology
S. Kassaee, A. Abu-Heiba, M. Starke, M. Chinthavali, A. Momen, Oak Ridge National Laboratory (ORNL), US
Parametric analysis of a hybrid liquid air and thermochemical energy storage system
S. Wu, C. Zhou, E. Doroodchi, B. Moghtaderi, The University of Newcastle, AU
Development of a Phase Change Energy Storage Module with High Recovery Rate for Power Generation Applications
M. Belaed, M.M. Rahman, Wichita State University, US
10:30Micro & Bio Fluidics, Lab-on-Chip
Session chair: Ioannis (Yanni) Karampelas, FLOW-D, US
Femtogram resolution of iron concentrations in cells: Implication for Point of Care blood cell analysis
J. Chalmers, The Ohio State University, US
Advanced MD and CFD models for the design of magnetophoretic-microfluidic devices for blood detoxification processes
C. González-Fernández, J. Gómez-Pastora, A. Basauri, M. Fallanza, E. Bringas, J.J. Chalmers, I. Ortiz, University of Cantabria, ES
Continuous-flow Magnetic Fractionation of Red Blood Cells Based on Hemoglobin Content – Clinical Blood Supply Implications and Sickle Cell Anemia Treatment
J. Gomez-Pastora, M. Weigand, J. Kim, J.J. Chalmers, The Ohio State University, US
Predictive Computational Model of Microfluidic Deformability Cytometry Utilizing a Cross-Slot Configuration
D.B. Khismatullin, Tulane University, US
Single Cell Characterization Using Microfluidic Dielectric Spectroscopy (MDS)
A. Beskok, Southern Methodist University, US
Droplet Microfluidic Platform for the Label-Free Sorting of Cancers Cells based on Glycolysis
C. Zielke, C.W. Pan, A. Gutierrez, C. Feit, C. Dobson, C. Davidson, B. Sandel, P. Abbyad, Santa Clara University, US
10:30Design, Modeling, Simulation & Software Innovation
Session chair: Nanci Hardwick, MELD. Manufacturing Corporation, US
Additive manufacturing needs validated machine learning for simulation-based part quantification
W.K. Liu, Northwestern University, US
Large Generative Designs Optimized for Production Through Simulation and Produced with Multi-Axis Hybrid Metal Additive
S. Gardner, Big Metal Additive, LLC, US
Integrated process-structure-property modeling framework and methods for process design and performance prediction of additively manufactured material systems
W.K. Liu, Z. Gan, C. Yu, O.L. Kafka, K.K. Jones, Y. Lu, Northwestern University, US
Prediction and optimization of surface roughness in additive manufacturing with data-driven multiphysics models
Z. Gan, K.K. Jones, Y. Lu, L. Cheng, J. Lua, G. Wagner, W.K. Liu, Northwestern University, US
High Fidelity vs Low Fidelity Physics-Based Modeling of Laser Powderbed Fusion Processes: Accuracy vs. Speed
C. Katinas, Y.C. Shin, Purdue University, US
AM computational tech: Software for multiscale simulation and process modeling of additive manufacturing
H. Hosseinzadeh, Rowan University, US
Modeling Optical, Reaction, and Transport Effects in Continuous Stereolithographic 3D Printing
Z.D. Pritchard, M.P. de Beer, R.J. Whelan, T.F. Scott, M.A. Burns, University of Michigan, US
10:30Nanoelectronics
Magneto-Ionic Control of Heterostructures and Interfaces
K. Liu, Georgetown University, US
Optically-Induced Circular Currents and Giant Inverse Faraday Effect in 2D Electron Liquid for Tunable Absorption of THz radiation
S.O. Potashin, V. Yu. Kachorovskii, M. Shur, Rensselaer Polytechnic Institute, US
Random Telegraph Noise Induced by Single-Charge Trap of Negative Capacitance MOSFETs with MFMIS and MFIS Structures
S. Reddy Kola, National Chiao Tung University, TW
Atomristors: Non-volatile Resistance Switching Behavior in 2D Monolayers and the Applications in Memory, RF Switch and Neuromorphic Computing
X. Wu, R. Ge, M. Kim, D. Akinwande, J.C. Lee, The University of Texas at Austin, US
Dependence of Breakdown Voltage on Passivation-Layer Thickness of Field-Plate AlGaN/GaN HEMTs
T. Iwamoto, D. Kubota, S. Akiyama, K. Horio, Shibaura Institute of Technology, JP
10:30Novel Chemical & Physical Sensors
Microfabricated sensors and spectroscopy systems for real-time chemical analysis
A. Scherer, California Institute of Technology, US
Ultrasensitive, Thin-film Sensors for the Trace Detection of Explosives
P. Ricci, O. Gregory, University of Rhode Island, US
Microfluidic Paper-based Analytical Devices for Rapid On-site Optical Chemical Analysis in the Oil Field
S. Chang, H. Ow, B. Yoon, W. Wang, Aramco Research Center, Aramco Services Company, US
Leidenfrost Evaporation Assisted Ultrasensitive SERS Detection Using Hierarchical Plasmonic Micro/Nanostructures
J. Song, W. Cheng, M. Nie, W. Nam, X. He, J. Cheng, W Zhou, Virginia Tech, US
10:30Innovations for Next-gen AI
TBA
C. Milroy, NVIDIA, US
TBA
P. Das, IBM Thomas J Watson Research Center, US
How Can the DoD Leverage Big Data, AI and Machine Learning to Accelerate UxS Integration and Decision Making
G. Galdorisi, Naval Information Warfare Center Pacific, US
In-Storage Distributed Machine Learning for the Edge
V. Alves, NGD Systems, Inc., US
Graph-Centric Machine Learning: Algorithms, Systems, and Cybersecurity Applications
H. Huang, George Washington University, US
A Study of Famous CNN Architectures to Have Descent Base Models
M. Bari, T-Mobile, US
Concept for a Natural Language Processing (NLP) Application: Artificial Intelligence (AI) Technology for Text and Language Search (ATTLS)
M. Niv, N. Kumar, E. Henry, T&T Consulting Services, Inc, US
10:30AI Design & Manufacturing
Session chair: Ishita Chakraborty, Stress Engineering Services, US
A Bayesian Experimental Autonomous Researcher for Mechanical Design
K. Brown, Boston University, US
Preform Design Prediction Model Based on Convolutional Neural Network Deep Learning in Piston Forging
S. Lee, L. Quagliato, J. Sun, N. Kim, Sogang University, KR
Semi-supervised and Reinforcement Learning Methods for VLSI Chip Design
J. Obert, Sandia National Labs, US
A Deep Convolutional Neural Network for Predicting the Failure Response of High-pressure Gas Pipes subject to Pitting Corrosion
S. Soghrati, Ohio State University, US
A Holistic, Digital-Twin Approach to Performance Simulation of Automated Fiber Placement Manufactured Parts
R. Cook, P.-Y. Lavertu, MSC Software, US
Machine Learning for Glass Manufacturing
M. Bauchy, University of California, Los Angeles, US
12:00Lunch (on your own)
1:30Biofuels
Session chair: Rebecca Locker, Modern Meadow, US
TBA
K. McNeely, ExxonMobil, US
Current state and future direction of algal based biorefineries: An economic and life cycle perspective
J.C. Quinn, J. Cruce, M. Somers, B. Beckstrom, P. Chen, K. DeRose, A. Beattie, D. Quiroz, J. Greene, Colorado State Univeristy, US
Environmental impact assessment of biofuels production processes from various types of woody biomass. A case study in Scots Pine forests stands.
L. Virbickas, I. Kliopova, Kaunas University of Technology, LT
Integrated Biorefineries (IBRs) – Key Technology Challenges and Opportunities
R. Shende, South Dakota School of Mines & Technology, US
Methane and Volatile Fatty Acids Recovery from Municipal Sludge by different configuration of Anaerobic Digestion and Hydrothermal Pretreatment
F.L. Kakar, Ryerson University, CA
Co-liquefaction of Pineapple peel and poultry manure: Effects of low cost pretreatment and microbial community structure
S.O. Dahunsi, Landmark University, NG
1:30Carbon Nano Structures & Devices
Session chair: Wolfgang S. Bacsa, University of Toulouse, France, Christopher Sims, NIST, US
Carbon Nanostructures for Energy Conversion and Storage: From Li-S battery, Supercapacitor, to Nitrogen Fixation
J. Huang, B.G. Sumpter, Oak Ridge National Laboratory, US
Nanoscale carbon for print-in-place electronics
A. Franklin, Duke University, US
Additive manufacturing of 3D architectures with 0D/1D/2D materials
K. Fu, University of Delaware, US
Lightweight Non-metal Electrical Conductor: Carbon Nanotube/Carbon Fibers with High Strength and Electrical Conductivity
S. Zhang, Yu. Dessureault, C. Jolowsky, A. Hao, J.G. Park, R. Liang, Florida State University, US
Highly Conductive Transparent Carbon Nanotube Thin Films
H. Li, Atom Inc, US
1:30Composite Materials Processing and Applications
Session chair: Xindi Yu, The Dow Chemical Company, US
More precise organization of polymer nanocomposites using magnetic fields
N. Yamamoto, The Pennsylvania State University, US
Science-based Optimization of Plastic Wood Composite Formulations for Extrusion
J. Xing, A. Kundu, A. Duhduh, J. Coulter, Lehigh University, US
A Novel PTFE Composite material for Aerospace Applications
E.R. Kutelia, S.I. Bakhtiyarov, New Mexico Institute of Mining and Technology, US
A New Hybrid Manufacturing for 3D Printed Composites
K. Song, S. Jambhulkar, W. Xu, Arizona State University Polytechnic, US
Out-of-oven curing of resins and adhesives using radio frequency heating of carbon fillers
M. Green, Texas A&M University, US
1:30Environmental Health & Safety of Nano and Other Advanced Materials
Session chair: Philip Demokritou, Harvard School of Public Health, US
Safety assessment of ingested engineered nanomaterials: Model systems, challenges and implications to human health
D. Bello, University of Massachusetts, Lowell, US
Nanotechnology-enabled Clothing: Effect of Handling on the Release of Particles and Potential Exposures
L. Calderon, H-J Oh, G. Mainelis, Rutgers University, US
Nanomaterial additives in home vinyl siding – Evaluation of product aging, performance, and nanomaterial release during artificial weathering
R.S. Lankone, G. Sarti, M. Zammarano, C. Cardelli, L-P Sung, National Institute of Standards and Technology, US
Practical Handling Strategies for Advanced Materials and Technologies: Teasing Out Specifics from General Recommendations
J.A. Shatkin, K. Ong, J.D. Ede, Vireo Advisors, LLC, US
Risk Assessment Framework for Assessment of Existing Manufactured Nanomaterials under the Canadian Environmental Protection Act, 1999
A.M. Belknap, J.O. Brien, G. Arvanitakis, J. Gauthier, M. Lapointe, K. Nguyen, M-C. Sauvé, D. Vladisavljevic, M. Zein Aghaji, Y. Zhang, Health Canada, CA
3:15Discussion panel: Environmental Health & Safety of Nano and Other Advanced Materials: Challenges & Opportunities
Session chair: Philip Demokritou, Harvard School of Public Health, US
G. Mainelis, Rutgers University, US
D. Bello, University of Massachusetts, Lowell, US
J.A. Shatkin, Vireo Advisors, LLC, US
A. Belknap, Health Canada, CA
R. Lankone, National Institute of Standards and Technology, US
1:30Carbon Capture & Utilization
Session chair: Elizabeth Burton, UC. Berkeley, US
Performance-Advantaged Plastic Monomers Made from CO2 and Waste Biomass
M. Kanan, Stanford University, US
TBA
R. Cortright, National Renewable Energy Laboratory, US
Turning CO2 Into a Building Material by Mineralization
M. Bauchy, G. Sant, University of California, Los Angeles, US
A saline-water based mineralization scheme for gigaton-scale CO2 management
E.C. La Plante, J. Wang, A. Alturki, D. Simonetti, D. Jassby, G. Sant, University of California, Los Angeles, US
Integrated Process of CO2 Capture and Conversion to Chemicals: Technology Opportunities and Challenges
C. Panchal, K. Goyal, R. Doctor, E3Tec Service, LLC, US
1:30Energy Storage Implementation
Session chair: Imre Gyuk, U.S. Department of Energy
Evaluating Safety Characteristics of Lithium-Ion Battery Systems Through Cascading Thermal Runaway Experiments and Modeling
R. Shurtz, A. Kurzawski, J. Hewson, Y. Preger, L. Torres-Castro, J. Lamb, Sandia National Laboratories, US
AMIVP - A Machine Intelligence based Storage Allocator for Virtual Power Plant Applications
B. Abegaz, Loyola University of Chicago, US
Battery Chemistry Agnostic Grid-Tied Secondary Use Energy Storage System
M. Chinthavali, M. Starke, S. Marti, R. Krishnamoorthy, P. Bhowmik, Oak Ridge National Laboratory, US
Campus technology innovations: achieving resiliency with modern funding
R. Garcia, D. Naccarato, Johnson Controls, US
Powernet in Farms: A could-based approach to manage electrical loads in livestock farming
G. Cezar, T. Navidi, L. Buechler, N. Milivojevic, A. El-Gamal, R. Rajagopal, Stanford University, US
US Navy Integrated Power & Energy System
S.P. Markle, US Navy, Electric Ships Office, US
1:30Micro & Bio Fluidics, Lab-on-Chip
Session chair: Sarah Tao, Sanofi
Vortex-integrated multi-molecular delivery to catalyze personalized treatment.
S.C. Hur, Johns Hopkins University, US
Bioprinted Organotypic GBM-Cancer-On-Chip
E. Dogan, R. Schwartz, S. Karimu, A. Miri, Rowan University, US
Design of Implantable Microfluidic Device Based on Polyacryamide Hydrogel for Kidney Replacement
M. Tamer, M. Bassil, M. Bechelany, S. Balme, Ph. Miele, M. El Tahchi, Montpellier University, FR
Microfluidic “Emulated Soil Micromodels” to Accelerate Development of Sustainable Agriculture Biotechnology
L.M. Shor, Y-S Guo, J. Furrer, D.J. Gage, University of Connecticut, US
3:00Discussion Panel: Frontiers in Micro & Bio Fluidics, Lab-on-Chip
Session chair: Sarah Tao, Sanofi
J. Chalmers, The Ohio State University, US
A. Morss Clyne, University of Maryland, US
S.C. Hur, Johns Hopkins University, US
J. Min, Chung-Ang University, KR
J. Berthier, University of Washington, US
1:30Industry 4.0: Cyber-Physical Connections in Additive Manufacturing
Session chair: Nanci Hardwick, MELD. Manufacturing Corporation, US, Slade H. Gardner, Big Metal Additive, Inc., US
TBA
P. Zelinski, Additive Manufacturing, US
TBA
Z. Zohrabian, Applied Concepts Group, US
An Overview of Additive Manufacturing in the Space Industry
P. Smith, Bryce Space and Technology, US
Optimized, Biomimetic Design of Rocket Engines for Additive Manufacturing
K. Adriany, A. Kieatiwong, R. Fishel, Additive Rocket Corporation, US
A 3d-printing knowledge base for early phase product engineering decisions
R. Willmann, Carinthia University of Applied Sciences, AT
Development of a Framework for Component Repair Using Additive Manufacturing
M. Walluk, A. Luccitti, B. Hilton, B. Baker, K. Schipull, Rochester Institute of Technology, US
1:30Machine Learning for Medical Diagnostics
Session chair: Prakash D. Nallathamby, Notre Dame University, Eric Gale, Harvard Medical School
Point-of-care serodiagnostic test using a multiplexed paper-based immunoassay and machine learning
Z. Ballard, University of California, Los Angeles, US
Machine Learning for Automated Hepatic Fat Quantification
H. Sagreiya, A. Akhbardeh, University of Pennsylvania, US
An Unsupervised Approach for Treatment Effectiveness Monitoring Using Curvature Learning
A. Akhbardeh, H. Sagreiya, Stanford University, US
Novel respiratory monitoring using ultrasound signaling
G. Bilen-Rosas, I. Ong, H. Rosas, University of Wisconsin School of Medicine and Public Health Madison, US
Microbubbling Digital Assay
P. Wang, University of Pennsylvania, US
AI Platform for DNA Diagnostics, Therapeutics & Ancestry
R. Peterson, J. Kahn, DNA Analtytics, US
Kidney Cancer Staging using Deep Learning Neural Network
N. Hadjiyski, Ann Arbor Pioneer High School, US
1:30Town Hall Meeting: Nanotechnology-Enabled Sensors Comparing Federal Needs to the Current State of Technology
This session will open with a panel of Federal representatives describing their respective agencies' technical needs and requirements for nanotechnology-enabled sensors. This panel will be followed by a moderated town hall discussion of the current state of technology relative to the articulated needs.
1:30AI for Manufacturing Inspection and Control
Session chair: Keith Brown, Boston University, US
TBA
Y. Liu, Cardiff University, UK
Manufacturing Quality Inspection Using AI and Edge Computing
C. Ouyang, T. Cook, C. Lu, IBM, US
Artificial Intelligence and Machine Learning for Weld Modeling and Quality Monitoring
J.E. Jones, V.L. Rhoades, M.D. Mann, T. Surrufka, EnergynTech, Inc., US
A Data-Driven Approach for Selecting Critical Process Parameters in Material Extrusion Additive Manufacturing
F. Pourkamali-Anaraki, A. Peterson, R. Jensen, University of Massachusetts Lowell, US
Laser Dissimilar Material Quality Assessment by Deep Learning
T. Kim, C. Han, H. Choi, Keimyung University, KR
Semantic Segmentation for 3D Feature Detection in the Automation of High Mix Industrial Processes
M. Powelson, Southwest Research Institute, US
Machine Learning for In-Water Inspection of Submarine Hull Coatings
M. An, J. Cipolla, A. Shakalis, B. Hiriyur, R. Tolimieri, Prometheus Inc., US
Gamma-Ray Raster Imaging with Robotic Data Collection
W. Wells, T. Aucott, Savannah River National Laboratory, US
4:00TechConnect Innovation Leaders Networking Reception - Poster Session II
4:00Bio-based Materials & Biofuels - Posters
Waste-Powered Microgrid for Enhanced Energy Security of Critical Base Infrastructure
D. Robau, National Energy USA, US
Comprehensive Characterization of Bio-Crude Oil from Hydrothermal Liquefaction of Kitchen Waste
H. Bayat, M. Dehghanizadeh, J.M. Jarvis, C.E. Brewer, U. Jena, New Mexico State University, US
HTL Derived Biochar for Supercapacitor Electrodes
V. Amar, B.K. Maddipudi, K. Shell, J. Houck, A. Thakkar, R.B. Gupta, S. Kumar, R. Shende, South Dakota School of Mines and Technology, US
4:00Carbon Nano Structures & Devices - Posters
Electronically Pure Single-Chirality Semiconducting Single-Walled Carbon Nanotube for Large-Scale Electronic Devices
H. Li, Atom Inc, US
Examples of Classical and Nonclassical Symmetric Fullerenes
F.J. Sanchez-Bernabe, Universidad Autonoma Metropolitana, MX
Fabrication of Aligned and Random CNT films for flexible electronics, energy harvesting and artificial muscles
M.D. Lima, LINTEC of America, US
Natural Gas Conversion to Value-Added Carbon Materials Using Microwave Plasma Technology
R. Kumal, A. Gharpure, A. Mantri, K. Zeller, V. Viswanathan, G. Skoptsov, R. Vander Wal, Penn State University, US
On diamagnetic response of composite graphene and graphite nanostructures
A. Rzhevskii, S. Chahid, R. Dulal, S. Teknowijoyo, A. Gulian, Thermo Fisher Scientific, US
Theoretical Studies of Catalytic Mechanism of Electrolyte Additives for Cycle Life Improvement of Nanoporous Carbon-Based Li-S Battery
J. Huang, J. Zhou, B.G. Sumpter, J. Jakowski, P.R.C. Kent, C. Liang, S.C. Smith, Oak Ridge National Laboratory, US
Direct Laser-Induced Nanocarbon Formation on Flexible Polymers: Tailoring Porous and Fibrous Morphologies
M. Abdulhafez, M. Bedewy, University of Pittsburgh, US
Static and free vibration analysis of Functionally Graded Carbon Nanotubes reinforced composite nano plate
A. Harsha, S.J. Singh, Government Engineering College Bikaner, IN
4:00Composite Materials - Posters
The Small Business Playbook: The Five Must-Have Tools to Get Your Tech Out of the Lab and to Your Customers
A.J. Grayson, Precipice IP PLLC, US
A Conical Shell Theory of Hybrid Anisotropic Materials
S.W. Chung, CICERO ENG Service, US
Transparent Polyimide Nanocomposite for Flexible Display Substrates
A.R. Lim, J-H Chang, Kumoh National Institute of Technology, KR
Swatch Test of Protective Cloth Coated with Graphene-Based Nanomaterials against Chemical Warfare Agents
D. Ka, S. Jang, H. Park, J. Seo, H. Jung, Y. Jin, Agency for Defense Development, KR
Polyethylene Based Nanocomposite Films Display Increased Resistance to UV Irradiation
I. Mahmud, T. Thuy, M. Nguyen, P. Bernazzani, Lamar University, US
A New Paradigm in Seismic Safety
C. McGlynn, C. Zhu, H. Zhang, Rowan University, US
Nanotechnology – No longer a standalone discipline, growth in medicine and biology: Applications, Challenges and Opportunities.
D. Newberry, Newberry Technology Associates, US
Silver Nanoparticle Reinforced Polylactic Acid /Gelatin Composite for Advanced Wound Dressing Application
N.M. Bahadur, Y. Akter, R. Rashid, M. Islam, P. Haque, S. Alam, Noakhali Science and Technology University, BD
Fabrication of silicon and iron oxide modified carbon nanotubes - polystyrene composite for engineering smart textile products
N.U. Ahamad, S.U. Ahamed, M.M. Alam, M. Al-Mamun, Shahjalal University of Science and Technology, BD
Hepatocellular Carcinoma Cells Response on Nanofunctional Films prepared through Time-Dependent Reduction Process in Physiological pH Environment
J. Jaiswal, M. Dhayal, Indian Institute of Technology-Banaras Hindu University, IN
Flexible Magnetoelectric Polymer Nanocomposites for Electronics Application
B. Sapkota, A. Martin, V. Rangari, Tuskegee University, US
4:00Nanoparticle Synthesis & Manufacturing Innovation - Posters
Microbial Synthesis and Characterization of Silver Nanoparticles using Lactococcus lactis TNM-B1
M.B. Osho, A.O. Precious-Egere, A.O. Awotula, E.A. Ofudje, McPherson University, NG
Inhibition Efficiency of Silver-Gold Alloy Nanoparticles on Corrosion of Mild Steel, Stainless Steel and Aluminium in 3.5 M NaCl Medium
J.K. Odusote, T.B. Asafa, E.O. Shonubi, University of Ilorin, NG
Electrical and dielectric properties of MoO3 nanorods and MoO3/rGO nanocomposites
S. Nallani, Pondicherry University, IN
Structural and Electrical Conductivity studies of NaNiPO4 for Sodium-Ion Battery Applications
S. Nallani, Pondicherry University, IN
Release of Silver Nanoparticles Synthetized by Green Chemistry and Encapsulated in Alginate Beads
A. Guerrero-Guzmán, I. Cruz-Soto, T. Rodríguez, J.M. Hugo, G. Velázquez-Juárez, D.R. Sánchez-Chiprés, A. Zamudio-Ojeda, Universidad de Guadalajara, MX
Surfactant Stabilized Copper Nanoparticles Synthesis, Characterization And Investigation of Their Tribological Behavior As Additive In Lubricating Oil
F.A. Bezza, E.M.N. Chirwa, University of Pretoria, ZA
Molecular Nanomaterials
H. Hong, G. Christensen, C. Bailey, South Dakota School of Mines and Technology, US
hollow/porous-walled SnO2 for lithium-ion battery
B-I Park, J-S Park, S. Yu, S-H Cho, J.Y. Byun, J. Oh, S.Y. Lee, Korea Institute of Science and Technology, KR
Structural influence of nitrogen adducts on the morphology of bismuth sulphide thin films
S.A. Saah, J.A.M. Awudza, N. Revaprasadu, University of Energy and Natural Resources, GH
Green Syntheses of Carbon-based Quantum Dots using Spent Grain from the Brewing Process
M. Demiar, M. Patterson, University of Wisconsin - Stout, US
Synthesis, Characterization and Application of Nanocomposite Materials
N.M. Bahadur, Y. Akter, K. Afrin, S. Islam, S. Alam, R. Rashid, M.A. Samad Azad, N. Suzuki, M. Sato, Noakhali Science and Technology University, BD
Sol-Gel Preparation and photocatalytic properties of TiO2/SiO2/ɤ-Fe2O3/rGO nanocomposite as an efficient and reusable photocatalyst under visible light
M. Mokhtarifar, R. Kaveh, M. Bagherzadeh, M. Ormellese, M.P. Pedeferri, M.V. Diamanti, Politecnico di Milano, IT
Superconducting phases Tc ≥ 200K in homo phases Bi / Pb cuprate obtained by solar energy.
D.D. Gulamova, H. Bahronov, S.M. Ashimov, J.G. Chigvinadze, Academy of Sciences of Uzbekistan, UZ
A new insight into the mechanism of the synthesis of gold nanoparticles by Turckevich method
E. Méndez, S. Botasini, Universidad de la Republica Uruguay, UY
Biosynthesis of Magnetite Nanoparticles by Green Chemistry Method with Lemon Waste Extract
L. Verástegui, R. Estrada, F. Vázquez, N. Elizondo, Universidad Autónoma De Nuevo León, US
4:00Environmental, Health & Safety - Posters
Monitoring of variation in mass of the PM 2.5 and P M 10 and other gaseous data at Vasundhara, Ghaziabad,UP,India :A case study
S. Agarwal, P. Parmita, S. Tiwari, SSV College Hapur, IN
Biosecurity Risk Assessment in Southeast Asia
E.V. Castriciones, V. Vijayan, University of the Philippines - Diliman, PH
Electronics Product Design for ATEX safety
A. Kumar, Honeywell, IN
Removal of siloxanes from landfill gases with the application of dielectric barrier discharge plasma
M.M. Tahiyat, S. Hoque, T.I. Farouk, University of South Carolina, US
4:00Carbon Capture & Utilization - Posters
Recent Advancements, Fundamental Challenges, and Opportunities in Design of Adsorbents for CO2 Capture
Y. Soujanya, A. Parameswari, CSIR-Indian Institute of Chemical Technology, IN
A Review of the Scientific Literature for Supercritical CO2 Applications to Propose its Efficacy as a Heat Transfer Fluid and for Vapor Compression Cycles
J.C. Zelaya, A. Tremante, Florida International University, US
Computational design and screening of solid materials for CO2 capture application
Y. Duan, DOE National Energy Technology Laboratory, US
4:00Micro Bio Fluidics - Posters
Microfluidic chip platform for the concentration of waterborne pathogens in large volume of water sample using graphene oxide coated beads
Y. Li, W. Cui, H. Jin Yoo, C. Baek, J. Min, Chung-Ang University, KR
Compact Phantom with embedded 3-dimensional capillary pumping network using sacrificial sugar structures for use in Biomedical and Biometric Applications
E. Breloff, K. Oh, State University of New York (SUNY) at Buffalo, US
Computational Modeling of Deformable Cell Sorting using Sequenced Micro-Pillars
D.B. Khismatullin, Tulane University, US
Compact Phantom with embedded 3-dimensional capillary pumping network using sacrificial sugar structures for use in Biomedical and Biometric Applications
E. Breloff, L. Christie, K.W. Oh, SUNY at Buffalo, US
4:003D Printing - Posters
Selective laser sintering of glass-ceramic powders by CO2 laser radiation
D. Correa-Coyac, A. Ramos-Velazquez, A. Michtchenko, R. Zenteno-Garcia, Instituto Politécnico Nacional, MX
Hydrophobic 3D Printing Filament with Enhanced Mechcanical Properties
S. Baniya, S. Beckford, SurfTec, LLC, US
Laser-induced nanoparticle desorption for additive nanomanufacturing under ambient conditions
C. Zhao, University of Dayton, US
Additive Manufacturing (3D Printing) of Polymer Nanocomposites
A.A. Rashid, S.A. Khan, M. Koc, Hammad Bin Khalifa University, QA
A Novel, 3D Printed Test Fixture for High Pressure Measurement Experiment
F. Anwar, Marquette University, US
High Resolution and High Speed SLA 3D Printer (RECILS) using a Plane Building Platform and a Cylindrical Window
K. Soeda, H. Suzuki, S. Yokobori, K. Konishi, H. Tamaru, N. Mio, M. Kuwata-Gonokami, J. Yumoto, The University of Tokyo, JP
3D Printing of Rubber Filament
L. Phaen, University of Massachusetts Lowell, US
Wire Arc Additive Manufacturing of Nano-treated High Strength Aluminum
X. Li, M. Liese, M. Sokoluk, University of California, Los Angeles, US
Smart Design for 3D Printing Pharmaceutical Tablets for Patient Centric Product Development
N. Yazdanpanah, Procegence, US
4:00Nanoelectronics - Posters
Analysis of High Average Breakdown Fields between Gate and Drain in AlGaN/GaN HEMTs with High-k Passivation Layer
R. Tomita, S. Ueda, Y. Kawada, K. Horio, Shibaura Institute of Technology, JP
Frequency to Digital Converter
X. Liu, T. Ytterdal, M. Shur, Rensselaer Polytechnic Institute, US
IInfluence of Electron Interference Effects on Tunneling in 2D Semiconductor Nanostructures
V.A. Petrov, A.V. Nikitin, Institute of Radio Engineering and Electronics, Russian Academy of Sciences, RU
Single GaN Nanowire Field Effect Transistor for Elevated Temperature Applications
M.A. Yildirim, K. Teker, Istanbul Sehir University, TR
Some problematic points in identification of bismuth impurity centers in floating-zone silicon irradiated with 15 MeV protons
N. Arutyunov, Martin Luther University Halle, IPLT-Institute of Electronics, Tashkent, UZ
Analysis of Lag Phenomena and Current Collapse in Field-Plate AlGaN/GaN HEMTs with High-k Passivation Layer
K. Komoto, Y. Saito, K. Horio, Shibaura Institute of Technology, JP
Economy driven SiC Power Electronics Technology Development supported by the ECSEL Joint Undertaking framework program funds
T. Bieniek, G. Janczyk, A. Sitnik, A. Messina, Łukasiewicz Research Network – Institute of Electron Technology, PL
Smart Power and Power Discretes Hardware-software co-design for reliability improvement of BLDC power drivers for eMobility by key BCD Technologies running in Europe
G. Janczyk, T. Bieniek, Lukasiewicz Research Network - Institute of Electron Technology, PL
4:00Sensors - Posters
Innovative Electrochemical Sensor for Detection of Cu2+ In Aquatic Environment Via Custom Built Bluetooth Enabled Electrochemical Platform
P.U. Ashvin, I. Fernando, G.K. Kosgei, L.C. Moores, A. Netchaev, J.D. Ray, K. Conley, U.S. Army Engineer Corp. ERDC, US
Copper sensing via colorimetric and fluorometric approaches
P.U. Ashvin, I. Fernando, G.K. Kosgei, L.C. Moores, U.S. Army Engineer Corp. ERDC, US
Performance Simulations of Multi-Period Nanohole Array (NHA) Plasmonic Chemical/Biochemical Sensors
C. Dong, Y. Zhao, K.D. Benkstein, S. Semancik, M.E. Zaghloul, The George Washington University, US
Sensing Safety at Grade Crossings
C. McGlynn, H. Zhang, Rowan University, US
Mechanical Sensitivity Analysis of Double Inertial Mass MEMS Gyroscope
J. Nazdrowicz, A. Napieralski, Technical University of Lodz, PL
Silent Sentinel’s Loss and Theft Prevention
L. Coney, M. Safa, Bruce Corporation, US
Investigation of the electric transport mechanism in catalytic metal oxide films by simultaneous I-V and spectroscopic ellipsometry measurements at variable temperatures. The case of molybdenum and tin oxide.
D. Davazoglou, NCSR "Demokritos", GR
Low-Cost Method for Electrochemical Quantification of Hepatocellular Carcinoma Cell in Culture Media on Nanostructured Surfaces
J. Jaiswal, M. Dhayal, Indian Institute of Technology-Banaras Hindu University, IN
Lab-on-a-Bubble (LōB) Platform Technology: Detection of total coliforms in water for military field using a field-deployable system.
P. Cosme, E. Valliant, M. Medina-Rivera, C. Batt, A.D. Strickland, iFyber, LLC, US
On the border of chemical space: prediction of multianion inorganic systems Ln2OClFH2 (Ln = Y, La, Gd) with exceptional sensing characteristics
E. Strugovshchikov, A. Pishtshev, University of Tartu, EE
Fabrication of a rapid response on-chip biosensor
B. Maddipudi, V.S. Amar, H. Dosch, A. Shende, R.V. Shende, South Dakota School of Mines and Technology, US
Bioluminescence-based immunosensor using thermo-triggered ATP release from polymeric micelles-coated nanoparticles
E.-J. Jo, D. Hong, M.-G. Kim, Gwangju Institute of Science and Technology (GIST), KR
microsphere resonators for biodetection
L. Echeveria, S. Gilmore, S. Harrison, P. Singh, T. Bond, Lawrence Livermore National Laboratory, US
4:00Biomaterials - Posters
Bioinpired virus nanofiber for soft tissue engineering
S.Y. Yoo, Pusan National University, KR
Nanoparticles of hydroxide and magnesium oxide: formation of PLGA nanocomposite and possible biomedical application
G.J. Colmenares Roldán, M. Londoño, S. Mesa, F. Jaramillo, I.C. Ortiz, L.M. Hoyos Palacio, Funadación Universirtaria CEIPA/Universidad Pontificia Bolivariana, CO
Microwave-assisted synthesis of hydroxyapatite nanoparticles (HA) for production of bioabsorbable nanocomposites of PLGA-HA
G.J. Colmenares Roldán, I.C. Ortiz, L.M. Hoyos Palacio, Funadación Universirtaria CEIPA/Universidad Pontificia Bolivariana, CO
Physicochemical characterization of collagen films integrating PLGA nanocapsules, fabricated via electrospinning
L.M. Agudelo Gómez, J.A. Carlos Cornelio, L.M. Hoyos Palacio, G.J. Colmenares Roldán, Funadación Universirtaria CEIPA/Universidad Pontificia Bolivariana, CO
Electrode Modifications Using Surfactant/Myoglobin Films for Electrocatalysis of Bisulfite Reduction
A. Mohamed, Beni-Suef University, EG
Potentiometric Investigation on Complexation Equiibria and Stabilities of Divalent Metal Ion Complexes of L-Cysteine and Glycine in Aqueous Solutions
A.M. Radalla, Beni-Suef University, EG
Ternary Complex Systems of The Divalent Metal Ions, Ca(II) and Zn(II), with L-Cysteine and Diphenylamine as Ligands in Aqueous Media
A. Mohamed, Beni-Suef University, EG
4:00Innovations in AI - Posters
An EHR using AI technology as a Clinical Decision Support Tool
J.M. Penn, Guidance Founation Inc., US
Autonomous Conceptualization and Design by DABUS
S. Thaler, Imagination Engines, Inc., US
IoT + DDoS = Disruptive (Business + Cyber) Risk!
A. Pabrai, ecfirst, US
Improve Health Outcomes and Maximize Quality Improvement: Using Artificial Intelligence Models
S. Kapoor, HealthEC, US
A Review of AI Influence in Intellectual Property Law
D. Mottley, Howard University, School of Law, US
ABSCA - Boost Converter Switching Controller using Machine Learning Algorithms
B. Abegaz, Loyola University of Chicago, US
AROSV - An ROS based Self-Driving Vehicle Controller using Unsupervised Machine Learning Methods
B. Abegaz, Loyola University of Chicago, US
Dropping 500 Feet in 20 Seconds: Simulating the Cockpit Experience of an Airliner with a Trim Control Failure
A. Redei, Central Michigan University, US
Artificial Intelligence Trends Based on the Patents Granted by the United States Patent and Trademark Office
H.H.N. Abadi, M. Pecht, University of Maryland - Center for Advanced Life Cycle Engineering (CALCE), US
A Survey of Artificial Intelligence Funding in China
Z. He, W. Diao, M.G. Pecht, University of Maryland, US
Next Generation PCIe Network Fabric for High Performance AI Computing
C. Reynolds, Technical Systems Integrators, US
AI - Lack of data characterization significantly reduces accuracy of AI results
M. Gilger, Modus Operandi, US
4:00Advanced Manufacturing - Posters
The Development of Quick-Set, High-Solids Pharmaceutical Tablet Coatings
T. Kalantar, M. Ladika, H. Shao, S. Dean, K. Harris, P. Sheskey, K. Coppens, K. Balwinski, D. Holbrook, The Dow Chemical Company, US
Integrated Diode Voltage Level Shifter to Bridge I/O Compatibility of Multi-Generational Products
E.M. Spory, Global Circuit Innovations, Inc., US
Investigation of an Innovative Technology to Advance Injection Molding of Hot Runner Systems
K. Alqosaibi, C. Thakur, H. Noor, A. Duhduh, J. Coulter, Lehigh University, US
Ultra Fast Boriding : An Overview
O.L. Eryilmaz, O. Kahvecioglu and, A. Erdemir, Argonne National Laboratory, US
Mobile Machining System Technology for Large Workpiece for On-Site Manufacturing
S-K RO, C-J Kim, J-S Oh, S-C Lee, J-Y Shim, S-H Han, Korea Institute of Machinery and Materials, KR
High Throughput Manufacturing of Highly Oriented Post-drawn Polymer Nanofibers by Centrifugal Trackspinning
D. Jao, Rowan University, US
Shock wave Nano technology method
B. Gutman, SUNY,CUNY,USA,USSR,Israel, US
Investigation of the fidelity of micro molded features using micro injection molding process
A.A. Rajhi, A. Almalki, J.P. Coulter, Lehigh University, US
Measurement of micro-thickness for fiber optic processing in real time
B.A. García Avendaño, J.L. Camas-Anzueto, R. Grajales-Coutiño, M. Pérez-Patricio, Tecnológico Nacional de México/I.T. de Tuxtla Gutiérrez, MX
Strategic DMSMS Management throughout the Lifecycle Panel
R. Brown, Defense Standardization Program Office, US
Commercializing Nanotechnology - Roadmap to Nanoproducts
H.Q. Pe, MARTECH International Inc., US
Pharma 4.0: Advanced Manufacturing and Digital Transformation in Pharmaceutical Industry
N. Yazdanpanah, Procegence, US
High speed in-line defect inspection of UV cast-and-cure R2R replicated films
S. Turgut, Luminit, US
4:00AI for Advanced Manufacturing - Posters
Residual Distortion Prediction through an Artificial Intelligence Approach in Additive Manufactured Components
A. Imanian, TDA, US
Bayesian Networks Connecting Processing and Product Features in Additive Manufacturing
A. Malmberg, K. Chandra, A. Peterson, J. Mead, University of Massachusetts Lowell, US
Using Robotics to Assemble Graphene Supercapacitor
C. Wu, J. Kim, D. Magluyan, D.K. Kindred, Y. Zhou, N. Cao, H. Zhao, Z. Kuang, T. Kidd, S. Dobbs, Z. Yu, California State Polytechnic University, Pomona, US
4:00Energy Storage - Posters
New Cathodes for Rechargeable Aluminium-ion Batteries
S. Divya, J. Johnston, T. Nann, Victoria University of Wellington, NZ
Economy Analysis of Second-Life Battery in Wind Power Systems Considering Battery Degradation
Z. Song, University of Michigan, Ann Arbor, US
A cobalt oxides-based redox energy storage system hybridised with a supercritical CO2 Brayton cycle
S. Wu, C. Zhou, E. Doroodchi, B. Moghtaderi, The University of Newcastle, AU
One-spot synthesis of hierarchical LiNi0.5Mn0.2Co0.3O2 cathode material for Li-ion battery
X. Jiang, F. Liu, C. Xiong, Wuhan Institute of Technology, CN
Newly Proposed Study on the Recovery of Lithium from End-of Life of Battery of Electric Vehicle
J.P. Wang, Pukyong National University, KR
Estimation of Electronic Entropy Contributions to Oxygen Vacancy Formation Reaction in Nonstoichiometric Oxides via Analysis of Electronic Structure Properties
C.R.A. Cole, University of Florida, US
One-pot synthesis of tungsten oxide and carbide composite for supercapacitor electrodes
D.M. Soares, R. Vicentini, A.C. Peterlevitz, C.B. Rodella, L.M. Da Silva, G. Singh, H. Zanin, Kansas State University, US
Observations on Arrhenius degradation of lithium-ion capacitors
D.G. Moye, P.L. Moss, X. Chen, W.J. Cao, S.Y. Foo, Moye Consultants, US
Production of Supercapacitor Carbon Electrodes from Corn-stover Via Facile Thermal Activation
K. Shell, V. Amar, B. Maddipudi, A. Thakkar, R. Shende, S. Kumar, R.B. Gupta, Virginia Commonwealth University, US
Nanocomposites of Mesoporous (Mn, Ti)- Oxides and Graphene Nanoplatelets for Charge Storage
J.D. Houck, V.S. Amar, R.V. Shende, South Dakota School of Mines and Technology, US
Seismic-Resilient Electric Power Distribution Systems: Harnessing the Mobility of Energy Storage Systems
P. Dehghanian, The George Washington University, US
Binder-free NiCoFe layered double hydroxide nanosheets as electrode materials for flexible hybrid energy storage devices with high-rate and high-retention ability
C-S Ni, S-F Liu, J-F Li, C-W Pao, J-L Chen, H-Y Chen, J-H Huang, National Tsing Hua University, TW
2020 Sponsors & Partners
 

2019 SBIR/STTR Agency Partners:

SBIR/STTR Agency Partners