TechConnect World 2020
Co-Located with Nanotech 2020Co-Located with Nanotech 2020 SBIR/STTRSBIR/STTR AI TechConnectAI TechConnect
 

3D Printing

3D Printing

Submit your Poster Abstract - due April 10

Please first review the information for authors — abstract submission guidelines.

 

Symposium Co-Chairs

Slade H GardnerSlade H Gardner
Founder
Big Metal Additive, Inc.

Nanci HardwickNanci Hardwick
CEO
MELD Manufacturing Corporation

Key Speakers

Peter ZelinskiPeter Zelinski
Editor-in-Chief
Additive Manufacturing

Ryan HayleckRyan Hayleck
Additive Manufacturing R&D Manager
U.S. Navy

Zareh S. ZohrabianZareh S. Zohrabian
President and Chief Operating Officer
Applied Concepts Group

Wing Kam LiuAdditive manufacturing needs validated machine learning for simulation-based part quantification
Wing Kam Liu
Walter P. Murphy Professor, Northwestern University

Ken ChurchKen Church
CEO
nScrypt Inc.

 
Back to Top ↑

Symposium Sessions

Tuesday June 30

10:30Materials Innovations - Additive Manufacturing
1:30Additive Manufacturing Process Control and Equipment

Wednesday July 1

10:30Design, Modeling, Simulation & Software Innovation
1:30Industry 4.0: Cyber-Physical Connections in Additive Manufacturing
4:003D Printing - Posters
4:00Advanced Manufacturing - Posters
4:00AI for Advanced Manufacturing - Posters

Symposium Program

Tuesday June 30

10:30Materials Innovations - Additive Manufacturing
Session chair: Slade H. Gardner, Big Metal Additive, Inc., US
TBA
N. Hardwick, MELD Manufacturing Corp., US
National Science Foundation (NSF) SHAP3D Center for Additive Manufacturing
A. Ma, J. Mead, C. Hansen, J. Qi, University of Connecticut, US
Materials and Process Development Towards the 3D Printing of Functional Electronics
C. Glenn, W. Chan, Z.T. Deng, Morningbird Media Corporation, US
Dielectric Barrier Discharge Applicator for Heating Carbon-loaded Interfaces and Enhancing 3D-Printed Bond Strength
C.B. Sweeney, M.L. Burnette, B.R. Teipel, B.S. Zahner, D. Staack, M.J. Green, Texas A&M University, US
Scaling-up 3D Printing – from Laboratory to Construction
M. Carli, Laticrete International Inc., US
3D-Printed Rock: Combining Binder Jetting with Natural Materials to Create Rock Analogues for Unprecedented Experimentation
K.J. Hodder, S. Ishutov, R.J. Chalaturnyk, University of Alberta, CA
1:30Additive Manufacturing Process Control and Equipment
Session chair: Slade H. Gardner, Big Metal Additive, Inc., US, Nanci Hardwick, MELD. Manufacturing Corporation, US
TBA
R. Hayleck, U.S. Navy, US
TBA
K. Church, nScrypt Inc., US
MELD Process Fundamentals: An Emerging Solid-State Additive Technology for Metals and Metal Matrix Composites
H. Yu, Virginia Tech, US
Realtime in-process monitoring of porosity during additive manufacturing
B. Zhang, S. Liu, Y.C. Shin, Purdue University, US
Additive Manufacturing of Continuous Fiber Reinforced Thermoset Composite
B. Shi, Y. Shang, T-W Chou, K. Fu, University of Delaware, US
Extreme Scale Additive Manufacturing Using High Power Mobile Electron Accelerators
A. Sauers, Fermi National Accelerator Laboratory, US
Investigation of Poly(lactic acid) Crystallization in Additive Manufacturing through Alternating the Flow Area: Flow Induced Crystallization
H. Noor, K. Alqosaibi, A. Duhuh, J. Coulter, Lehigh University, US

Wednesday July 1

10:30Design, Modeling, Simulation & Software Innovation
Session chair: Nanci Hardwick, MELD. Manufacturing Corporation, US
Additive manufacturing needs validated machine learning for simulation-based part quantification
W.K. Liu, Northwestern University, US
Large Generative Designs Optimized for Production Through Simulation and Produced with Multi-Axis Hybrid Metal Additive
S. Gardner, Big Metal Additive, LLC, US
Integrated process-structure-property modeling framework and methods for process design and performance prediction of additively manufactured material systems
W.K. Liu, Z. Gan, C. Yu, O.L. Kafka, K.K. Jones, Y. Lu, Northwestern University, US
Prediction and optimization of surface roughness in additive manufacturing with data-driven multiphysics models
Z. Gan, K.K. Jones, Y. Lu, L. Cheng, J. Lua, G. Wagner, W.K. Liu, Northwestern University, US
High Fidelity vs Low Fidelity Physics-Based Modeling of Laser Powderbed Fusion Processes: Accuracy vs. Speed
C. Katinas, Y.C. Shin, Purdue University, US
AM computational tech: Software for multiscale simulation and process modeling of additive manufacturing
H. Hosseinzadeh, Rowan University, US
Modeling Optical, Reaction, and Transport Effects in Continuous Stereolithographic 3D Printing
Z.D. Pritchard, M.P. de Beer, R.J. Whelan, T.F. Scott, M.A. Burns, University of Michigan, US
1:30Industry 4.0: Cyber-Physical Connections in Additive Manufacturing
Session chair: Nanci Hardwick, MELD. Manufacturing Corporation, US, Slade H. Gardner, Big Metal Additive, Inc., US
TBA
P. Zelinski, Additive Manufacturing, US
TBA
Z. Zohrabian, Applied Concepts Group, US
An Overview of Additive Manufacturing in the Space Industry
P. Smith, Bryce Space and Technology, US
Optimized, Biomimetic Design of Rocket Engines for Additive Manufacturing
K. Adriany, A. Kieatiwong, R. Fishel, Additive Rocket Corporation, US
A 3d-printing knowledge base for early phase product engineering decisions
R. Willmann, Carinthia University of Applied Sciences, AT
Development of a Framework for Component Repair Using Additive Manufacturing
M. Walluk, A. Luccitti, B. Hilton, B. Baker, K. Schipull, Rochester Institute of Technology, US
4:003D Printing - Posters
Selective laser sintering of glass-ceramic powders by CO2 laser radiation
D. Correa-Coyac, A. Ramos-Velazquez, A. Michtchenko, R. Zenteno-Garcia, Instituto Politécnico Nacional, MX
Hydrophobic 3D Printing Filament with Enhanced Mechcanical Properties
S. Baniya, S. Beckford, SurfTec, LLC, US
Laser-induced nanoparticle desorption for additive nanomanufacturing under ambient conditions
C. Zhao, University of Dayton, US
Additive Manufacturing (3D Printing) of Polymer Nanocomposites
A.A. Rashid, S.A. Khan, M. Koc, Hammad Bin Khalifa University, QA
A Novel, 3D Printed Test Fixture for High Pressure Measurement Experiment
F. Anwar, Marquette University, US
High Resolution and High Speed SLA 3D Printer (RECILS) using a Plane Building Platform and a Cylindrical Window
K. Soeda, H. Suzuki, S. Yokobori, K. Konishi, H. Tamaru, N. Mio, M. Kuwata-Gonokami, J. Yumoto, The University of Tokyo, JP
3D Printing of Rubber Filament
L. Phaen, University of Massachusetts Lowell, US
Wire Arc Additive Manufacturing of Nano-treated High Strength Aluminum
X. Li, M. Liese, M. Sokoluk, University of California, Los Angeles, US
Smart Design for 3D Printing Pharmaceutical Tablets for Patient Centric Product Development
N. Yazdanpanah, Procegence, US
4:00Advanced Manufacturing - Posters
The Development of Quick-Set, High-Solids Pharmaceutical Tablet Coatings
T. Kalantar, M. Ladika, H. Shao, S. Dean, K. Harris, P. Sheskey, K. Coppens, K. Balwinski, D. Holbrook, The Dow Chemical Company, US
Integrated Diode Voltage Level Shifter to Bridge I/O Compatibility of Multi-Generational Products
E.M. Spory, Global Circuit Innovations, Inc., US
Investigation of an Innovative Technology to Advance Injection Molding of Hot Runner Systems
K. Alqosaibi, C. Thakur, H. Noor, A. Duhduh, J. Coulter, Lehigh University, US
Ultra Fast Boriding : An Overview
O.L. Eryilmaz, O. Kahvecioglu and, A. Erdemir, Argonne National Laboratory, US
Mobile Machining System Technology for Large Workpiece for On-Site Manufacturing
S-K RO, C-J Kim, J-S Oh, S-C Lee, J-Y Shim, S-H Han, Korea Institute of Machinery and Materials, KR
High Throughput Manufacturing of Highly Oriented Post-drawn Polymer Nanofibers by Centrifugal Trackspinning
D. Jao, Rowan University, US
Shock wave Nano technology method
B. Gutman, SUNY,CUNY,USA,USSR,Israel, US
Investigation of the fidelity of micro molded features using micro injection molding process
A.A. Rajhi, A. Almalki, J.P. Coulter, Lehigh University, US
Measurement of micro-thickness for fiber optic processing in real time
B.A. García Avendaño, J.L. Camas-Anzueto, R. Grajales-Coutiño, M. Pérez-Patricio, Tecnológico Nacional de México/I.T. de Tuxtla Gutiérrez, MX
Strategic DMSMS Management throughout the Lifecycle Panel
R. Brown, Defense Standardization Program Office, US
Commercializing Nanotechnology - Roadmap to Nanoproducts
H.Q. Pe, MARTECH International Inc., US
Pharma 4.0: Advanced Manufacturing and Digital Transformation in Pharmaceutical Industry
N. Yazdanpanah, Procegence, US
High speed in-line defect inspection of UV cast-and-cure R2R replicated films
S. Turgut, Luminit, US
4:00AI for Advanced Manufacturing - Posters
Residual Distortion Prediction through an Artificial Intelligence Approach in Additive Manufactured Components
A. Imanian, TDA, US
Bayesian Networks Connecting Processing and Product Features in Additive Manufacturing
A. Malmberg, K. Chandra, A. Peterson, J. Mead, University of Massachusetts Lowell, US
Using Robotics to Assemble Graphene Supercapacitor
C. Wu, J. Kim, D. Magluyan, D.K. Kindred, Y. Zhou, N. Cao, H. Zhao, Z. Kuang, T. Kidd, S. Dobbs, Z. Yu, California State Polytechnic University, Pomona, US

We encourage submissions to this symposium from forward-thinking leaders in the 3D printing and additive manufacturing field interested in sharing their innovations with the attending technical and corporate communities.

Topics & Application Areas

  • Additive Manufacturing Process Control and Equipment
  • Materials Innovations
  • Design, Modeling, Simulation & Software Innovation
  • Industry 4.0: Cyber-Physical Connections in Additive Manufacturing
  • Other
 
2020 Sponsors & Partners
 

2019 SBIR/STTR Agency Partners:

SBIR/STTR Agency Partners