NanoFab: Manufacturing & Instrumentation

NanoFab: Manufacturing & Instrumentation

Symposium Co-Chairs

Guy A. DeRoseGuy A. DeRose
Associate Director of Technical Operations
Kavli Nanoscience Institute, CALTECH
Aaron SteinAaron Stein
Electronic Materials: Nanofabrication
Brookhaven National Laboratory

Confirmed Invited Speakers

Jason SanabiaFocused Ion Beam Lithography with New Source Technologies
Jason Sanabia
President & CEO, Raith America, Inc.
Igal BaynNanofabrication Strategy towards Realization of Scalable Quantum Computing within and beyond Single Crystal Diamond
Igal Bayn
PostDoctoral Research Associate, MIT
Chang-Yong NamMetal Oxide Nanopatterning by Infiltration Synthesis in Polymer Templates
Chang-Yong Nam
Staff Scientist, Center of Functional Nanomaterials, BNL

Symposium Sessions

Monday June 16

3:00Innovation Spotlights: Energy-Efficiency: Bosch & Ingersoll Rand
Sustainable Nanomanufacturing - Posters 4:30

Tuesday June 17

10:30Innovation Spotlights: Advanced Materials: MeadWestvaco & DuPont
3:00NanoFab: Manufacturing & Instrumentation

Symposium Program

Monday June 16

↑ Back to Top
3:00Innovation Spotlights: Energy-Efficiency: Bosch & Ingersoll RandNational Harbor 5
Session chair: Goran Matijasevic, UC Irvine, US
3:00Bosch - Strategic Innovation Interests
A. Kojic, Bosch, US
3:15Ingersoll Rand - Strategic Innovation Interests
L. Adifon, Ingersoll Rand, US
3:30Rechargeable Zinc-Air Battery System
S. Bagheri, University of Waterloo, CA
3:37Improved High Temperature Electrolyte for Fuel Cells
P. Dowd, Arizona Technology Enterprises, US
3:44High Density Surface Nanotextures for Broadband, Omnidirectional Antireflection
K. Elcess, Brookhaven National Laboratory, US
3:51Supercritical CO2 Brayton for Compact High Efficiency Power Generation
G. Rochau, Sandia National Laboratories, US
3:58Bosch, Ingersoll Rand Q&A
↑ Back to Top
Sustainable Nanomanufacturing - Posters 4:30Expo Hall C
-Novel Additive Manufacturing of Tooling with Micro and Nanostructured Surfaces
L.W. Sit, M. Kumbhani, J.A. Genera, J. Shearer, J. Mead, C. Barry, University of Massachusetts Lowell, US
-High-rate Manufacturing of 3D Products with Micro and Nanostructured Surfaces
C. Barry, J. Mead, University of Massachusetts Lowell, US
-Nano Particles formation on powder(NPP) Substrate in Physical Vapor Deposition
S-K Koh, C. Lee, J.H. Lee, B.K. Kang, H. Kaji, M. Hayashi, GL Materials, Inc., KR
-Preparation of Composite of ZnS Nanoparticles and Montmorillonite by Cavitation Deposition
P. Praus, R. Dvorský, L. Svoboda, B. Kostura, VŠB-Technical University of Ostrava, CZ
-Three-Dimensional High-order Nano-rod Formation Using a Hydrogen-assisted Deep Reactive Ion Etching
S. Soleimani, S. Zanganeh, S. Azimi, Z. Sanaee, S. Mohajerzadeh and H. Taghinejad, University of Tehran, IR
-What is Below the Support Layer Affects Carbon Nanotube Growth: an Iron Catalyst Reservoir Yields Taller Nanotube Carpets
E. Shawat, V. Mor, L. Oakes, Y. Fleger, C.L. Pint, G.D. Nessim, Bar-Ilan university, IL
-High-yield synthesis of “floating” three-dimensional carbon nanofiber mats using controllable substrate-catalyst detachment
E. Shawat, I. Perelshtein, C.L. Pint, G.D. Nessim, Bar-Ilan university, IL
-Green Chemistry of Carbon Nanomaterials
E.V. Basiuk, V.A. Basiuk, Universidad Nacional Autónoma de México, MX
-A Sustainable, Mechanochemical Synthesis of Nanoparticles Supported on Lignin
M.J. Rak, T. Friščić, A. Moores, McGill University, CA
-Electrospun Nanocomposite Nerve Guidance Conduits for Peripheral Neural Regeneration
W. Zhu, L. Zhang, The George Washington University, US
-Roll-to-Roll (R2R) ALD Thin Film Coatings at Atmospheric Pressure
M. Groner, J. Spencer, K. Buechler, ALD NanoSolutions, US

Tuesday June 17

↑ Back to Top
10:30Innovation Spotlights: Advanced Materials: MeadWestvaco & DuPontNational Harbor 3
Session chair: Thomas Martinuzzo, Univalor, CA
10:30MeadWestvaco - Strategic Innovation Interests
P. France, MeadWestvaco, US
10:45DuPont - Strategic Innovation Interests
B. Provine, DuPont, US
11:00Nano-Enhanced Hydrophobic Surfaces
H. Malak, AES, Inc., US
11:07Rapid Synthesis of Titanate Nanofibers
A. Kundu, Lehigh University, US
11:14High throughput ALD
P. Lichty, Pneumaticoat Technologies, US
11:21Tailored Thermal Expansion Alloys
J. Monroe, Texas A&M University, US
11:28MeadWestvaco, DuPont Q&A
↑ Back to Top
3:00NanoFab: Manufacturing & InstrumentationChesapeake 6
Session chair: Guy A. DeRose, Kavli Nanoscience Institute, CALTECH; Aaron Stein, Brookhaven National Laboratory (bio, bio)
3:00Nanofabrication Strategy towards Realization of Scalable Quantum Computing within and beyond Single Crystal Diamond (invited presentation)
I. Bayn, Massachusetts Institute of Technology, US (bio)
3:25Metal Oxide Nanopatterning by Infiltration Synthesis in Polymer Templates (invited presentation)
C-Y Nam, Brookhaven National Laboratory, US
3:50Focused Ion Beam Lithography with New Source Technologies (invited presentation)
J.E. Sanabia, J. Klingfus, J. Fridmann, S. Bauerdick, Raith America, Inc., US (bio)
4:15Novel Fabrication Technique for ZnO-PMMA Hybrid Submicron Structures
M. Gervasio, Virginia Tech, US
4:35Spatially Controlled Fabrication of Brightly Fluorescent Nanodiamond-Array with Enhanced Far-Red Si-V Luminescence
S. Singh, V. Thomas, D. Martyshkin, V. Kozlovskaya, E. Kharlampieva, S.A. Catledge, University of Alabama at Birmingham, US
4:55High-rate Nanoscale Offset Printing Process Using Reusable Damascene Templates
H. Cho, J. Seo, J. Lee, S. Somu, A. Busnaina, Center for High-rate Nanomanufacturing, US

NanoFab Symposium

NanoFab 2014 consists of the latest research and development in nanofabrication technologies, devices and applications. The key to realize nanotechnology's potential is still the ability to assemble and manufacture nano-scale devices, structures with dimensions smaller than 100nm. This conference focuses on all areas of nanofabrication that will accelerate nanotechnology's progress: innovative research to state-of-the-art development to cost-effective manufacturability in nanofabrication processes and technologies for current and novel devices and applications, including enabling and differentiating aspects in materials, metrology, characterization, and reliability. The primary focus is on innovative fabrication that significantly advances current application and enables novel nano-application.

The 2014 NanoFab symposium will be integrated with the National Nanotechnology Initiative (NNI) Sustainable Nanomanufacturing Signature Initiative Symposium.

Conference Chairs

Jason Haaheim
Guy A. DeRose, California Institute of Technology
Aaron Stein, Brookhaven National Laboratory

Topics & Application Areas

  • Sustainable Nanomanufacturing
  • Novel Material Processes
  • Novel Nanoscale Device Fabrication
  • Advances in Direct-Write Nanoscale Deposition & Patterning
  • Advances in Bottom-Up Approaches to Nano-Composites & Nano-Particles
  • Non-Conventional Nano-Patterning: Top Down/Bottom Up Convergence
  • Harnessing Nanofabrication for Pharmaceutical Applications: biosensors, drug delivery, screening
  • Symbiotic technologies in Nanofabrication & Inspection: patterning, deposition, microscopy & spectroscopy
  • Other

Sponsor & Exhibitor Opportunities

√ Nanotech Conference & Expo  

√ Microtech Conference & Expo  

√ Cleantech Conference & Expo  

*Sponsorship Opportunities: Contact Chris Erb

Platinum Sponsors

Lockheed Martin
Nanocomp Technologies

Association Sponsor

Clean Technology and Sustainable Industries Organization (CTSI)

Producing Sponsors

Nano Science and Technology Institute


TechConnect Acceleration Partners:

Aerojet Rocketddyne
General Atomics Electromagnetics
Harris Harris Group
Ingersoll Rand
Lockheed Martin
Sherwin Williams
Union Honest Investments
*Sponsorship Opportunities: Contact Chris Erb

Free Subscription