Nanotech 2011

Thermal Conductivity and Viscosity Measurements of Water-Based Silica Nanofluids

S. Bobbo, L. Colla, M. Scattolini, F. Agresti, S. Barison, C. Pagura, L. Fedele
CNR-Consiglio Nazionale delle Ricerche, IT

Keywords: nanofluids, water, SWCNH, thermal conductivity, viscosity, stability

Abstract:

Nanofluids are a new class of fluids that could significantly improve the thermal properties of fluids used as thermal vectors. They are obtained by dispersing in common fluids (water, glycol, oil) solid nanoparticles (diameter <100 nm) of different materials (metal oxides, metals, carbon nanotubes) [1]. Also at relatively low nanoparticle concentrations, it is possible to get an unproportional increase in thermal conductivity and heat transfer coefficient [2-3], with a correspondent increase of the energy efficiency of plants or components using such fluids. In general, the higher the concentration, the higher the heat transfer enhancement. Other important parameters influencing the enhancement are material, dimension and shape of the nanoparticles [4], Zeta potential, pH, type and concentration of dispersants [5-6]. However, nanofluids can be actually applied in technological systems only if the addition of nanoparticles does not determine a significant viscosity enhancement, because the increase of energy required to pump the nanofluid could nullify the advantages obtained in terms of thermal properties. In the literature, several papers present measurements of thermal properties and/or viscosity for water based nanofluids and various kinds of added nanoparticles showing different behaviors [7, 8, 9].
 

TechConnect World 2011 Nanotech 2011 Clean Technology 2011 Microtech 2011 BioNanotech 2011 TechConnect Summit 2011
Program | Tracks | Exhibition | Press | Venue | Register |
Symposia | Short Courses | News | Subscribe | Contact | Site Map
© Copyright 2010 TechConnect World. All Rights Reserved.