Organic, Flexible and Printed Electronics

Organic, Flexible and Printed Electronics

Symposium Co-Chairs

Bin HuBin Hu
Associate Professor, Department of Materials Science and Engineering
University of Tennessee
Anupama B. KaulAnupama B. Kaul
Program Director for Electronics, Photonics and Magnetic Devices
National Science Foundation (NSF)

Confirmed Invited Speakers

Jay GuoTowards scalable fabrication of organic solar cells and optical metamaterials
Jay Guo
Professor, EECS Department, University of Michigan
David CarrollField Induced Polymer Electroluminescent Lamps - FIPELs
David Carroll
Professor and Director of the Center for Nanotechnology and Molecular Materials, Wake Forest University
Suchi  Guha'Enhanced performance of all organic field-effect transistors and capacitors through choice of solvent
Suchi Guha
Professor of Physics & Astronomy & Adjunct Faculty of Electrical Engineering, University of Missouri

This symposium focuses on innovative materials, devices and technologies which will enable high-performance, low-cost electronic devices for a range of important applications including low-cost organic photovoltaics for renewable energy generation, intelligent materials and sensors, and self-healing and flexible electronics.

Organic, flexible and printed electronics will revolutionize additive manufacturing processes for electronic devices by utilizing room temperature, ambient techniques in a roll-to-roll platform with potentially environmentally friendly materials.

Symposium Sessions

Wednesday June 18

8:30Organic, Flexible & Printed Electronics I
10:30Organic, Flexible & Printed Electronics II
1:30Innovation Spotlights: Materials-Energy: 3M & SABIC
Organic, Flexible & Printed Electronics - Posters 4:00

Symposium Program

Wednesday June 18

↑ Back to Top
8:30Organic, Flexible & Printed Electronics IPotomac 2
Session chair: L. Jay Guo, University of Michigan, US (bio)
8:30Towards scalable fabrication of organic solar cells and optical metamaterials (invited presentation)
J. Guo, University of Michigan, US (bio)
8:55Stretchable Electronics
J. Liang, L. Li, J. Hajagos, X. Niu, Z. Yu, Q. Pei, University of California, Los Angeles, US
9:15Production technologies for large area flexible electronics
T. Kolbusch, K. Crone, Coatema Coating Machinery GmbH, DE
9:35Printed Gas Sensors for the Trillion Sensor Universe
J.R. Stetter, E.F. Stetter, M. Findlay, V. Patel, KWJ Engineering Inc. & SPEC Sensors LLC, US
↑ Back to Top
10:30Organic, Flexible & Printed Electronics IIPotomac 2
Session chair: Suchismita Guha, University of Missouri, US (bio)
10:30Field Induced Polymer Electroluminescent Lamps - FIPELs (invited presentation)
D.L. Carroll, Wake Forest University, US (bio)
10:55Enhanced performance of all organic field-effect transistors and capacitors through choice of solvent (invited presentation)
S. Guha, G. Knotts, N.B. Ukah, University of Missouri, US
11:20High Performance Organic Transistors based on Molecular Doping
B. Lussem, M. Tietze, H. Kleemann, A. Fischer, A. Gunther, K. Leo, Kent State University, US
11:40A method to produce microelectronic devices on textile and paper substrates
I.G. Trindade, R. Miguel, J. Lucas, M. Pereira, M. Santos Silva, Universidade da Beira Interior, PT
↑ Back to Top
1:30Innovation Spotlights: Materials-Energy: 3M & SABICNational Harbor 3
Session chair: Purnesh Seegopaul, Pangaea Ventures, US
1:303M - Strategic Innovation Interests
T. Hebrink (invited), 3M, US
1:45SABIC - Strategic Innovation Interests
J. Amarasekera, SABIC, US
2:00Fiber Supported Ionic Liquid Sorbents
J. Sosenko, National Energy Technology Laboratory, US
2:07Hollow Fiber Membrane for Dehydration of Organic Solvents via Pervaporation
YP Yong, National University of Singapore, SG
2:14Membrane Dehydrator
L. DiNetta, Compact Membrane Systems, Inc., US
2:21Photoelectrochemical (PEC) Production of Hydrogen
E. Payne, National Renewable Energy Laboratory, US
2:28Solar Renewable energy generation, Solar Panel Manufacture, Concentrator Solar Panel
R. Kokenyesi, Beet Inc., US
2:353M, SABIC Q&A
↑ Back to Top
Organic, Flexible & Printed Electronics - Posters 4:00Potomac Registration Hall
-Effect of Porosity on Specific Resistance of Inkjet-Printed Silver Nanoparticles during Laser Sintering
Y.J. Moon, H. Kang, K. Kang, S.H. Lee, J.Y. Hwang, S.J. Moon, Korea Institue of Industrial Technology, KR
-Highly Selective and Robust SWNT Hybrid Sensor for Hydrogen Sulphide Detection
H.Y. Jung, Y.L. Kim, S. Park, A. Datar, H–J Lee, J. Huang, S. Somu, A. Busnaina, Y.J. Jung, Y–K Kwon, Center for High-rate Nanomanufacturing, US
-Effects of process variables on the properties of UV-range ZnMgBeGaO transparent conducting films
H.B. Cuong, C-S Lee, B-T Lee, Chonnam National University, KR
-Fully Integrated Embroidery Process for Smart Textiles
I.G. Trindade, P. Spranger, F. Martins, R. Miguel, M. Pereira, M. Santos Silva, Universidade da Beira Interior, PT
-Rapid Design and Additive Manufacturing of MRI System
M. Urdaneta, E. Anashkin, I.N. Weinberg, A. Sarwar, A. Nacev, P. Stepanov, L. Mair, S. Fricke, Weinberg Medical Physics LLC, US

Topics & Application Areas

  • Fabrication Technologies
  • Semiconductors
  • Advanced Packaging & Interconnects
  • solid state lighting and displays
  • Solar technologies
  • Smart textiles and e-paper
  • Other

Sponsor & Exhibitor Opportunities

 Exhibit and Showcase
 Become a Sponsor

Please contact: Denise Lee

TechConnect Acceleration Partners:

Lockheed Martin

In Partnership with


Sponsorship Opportunities: Contact Denise Lee

Free Subscription