Inkjet Design, Materials & Fabrication

Inkjet Design, Materials & Fabrication

Symposium Chair

Chris MenzelChris Menzel
Principal Scientist
Dimatix, Inc.

Confirmed Invited Speakers

Vince CahillInkjet Technology For Printed Electronics and 3D Fabrication
Vince Cahill
Owner, VCE Solutions
James YooBioprinting Technology for Regenerative Medicine Applications
James Yoo
Professor, Institute for Regenerative Medicine, Wake Forest

Symposium Sessions

Tuesday May 14

Inkjet Design, Materials & Fabrication - Posters 1:30

Wednesday May 15

11:00Inkjet Design, Materials & Fabrication
2:00Inkjet Applications

Symposium Program

Tuesday May 14

↑ Back to Top
Inkjet Design, Materials & Fabrication - Posters 1:30Expo Hall A
-Static Modeling on Landing Accuracy of Droplets in Magnetostrictive Inkjet System
E.J. Yoo, Y.W. Park, N.M. Wereley, Y.W. Park, Chungnam National University, KR
-Effects of Poly-(N-vinyl-2-pyrrolidone) Additive on Direct-Inkjet-Printed Silver Nitrate Conductive Lines
Y.F. Liu, P.H. Feng, H.L. Tsai, W.S. Hwang, National Cheng Kung University, TW
-Redesign of Magnetostrictive Inkjet PrintHead
K.H. Yoon, Y.W. Park, N.W. Wereley, Y.W. Park, Chungnam National University, KR
-Effects of Inkjet Printing Parameters on Conductive Line Patterns for Flexible Electronics Applications
H.-L. Tsai, W.-S. Hwang, Y.-F. Liu, J.-T. Wu, S.L.-C. Hsu, National Cheng-Kung University, TW
-Repeated Duplication in EHD Line Patterning on a Non-Conductive Substrate Based on Controlling the Polarity of Applied Voltages
S. Son, S. Lee, J. Choi, Sungkyunkwan University, KR
-Fabrication of Silver Lines on PET Film by Electrohydrodynamic Inkjet Printing
K.I. Lee, B. Lim, C.S. Lee, S.H. Kim, J.W. Cho, Y. Hong, Korea Electronics Technology Institute, KR

Wednesday May 15

↑ Back to Top
11:00Inkjet Design, Materials & FabricationBaltimore 5
Session chair: Chris Menzel, Dimatix, Inc., US
11:00Inkjet Technology For Printed Electronics and 3D Fabrication (invited presentation)
V. Cahill, D Taylor, VCE Solutions, US (bio)
11:25Gravimetric calibration for optical measurements of droplets-in-flight
R.M. Verkouteren, C.J. Zeissler, J.R. Verkouteren, National Institute of Standards and Technology, US
11:45Effect of Pressure Variation on Inkjet-Printed Line Pattern with Various Step Sizes of Ejected Droplets
J-K Wang, W-S Hwang, M-H Tsai, Y-F Liu, National Cheng-Kung University, TW
12:05Ultrasonic Milling and Dispersing Technology for Inkjet Nano-Particles
K. Hielscher, Hielscher Ultrasonics, DE
↑ Back to Top
2:00Inkjet ApplicationsBaltimore 5
Session chair: Chris Menzel, Dimatix, Inc., US
2:00Bioprinting Technology for Regenerative Medicine Applications (invited presentation)
J. Yoo, Wake Forest Institute for Regenerative Medicine, US (bio)
2:25Bio-ink for inkjet printing of living cells
C.J. Ferris, K.J. Gilmore, S. Beirne, D. McCallum, G.G. Wallace, M. in het Panhuis, ARC Centre of Excellence for Electromaterials Science (ACES), AU
2:45Ink-jet Printed CdS Thin Film Transistors Fabricated In-situ by Micro-reaction
J.C. Ramos, D. Kabir, J.I. Mejia, C.A. Martinez, M.A. Quevedo-Lopez, University of Texas at Dallas, US
3:05Inkjet printing of 200 nm monodisperse carbon nanoparticles: from smart ink formulation to thin film sensor properties
R. Vié, S. Berthon-Fabry, S. Blayac, E. Drahi, S. Jacomet, EMSE, FR
3:25A Study of Molten Lead-Free Solder Deposited by Inkjet Printing for Interconnections of Thin-Film Solar Cell Modules
W-M Chen, C-H Wang, W-S Hwang, National Cheng-Kung University, TW
3:45Impact of Ink Synthesis on Processing and Properties of Inkjet-Printed Silicon Thin Films
E. Drahi, A. Gupta, S. Blayac, L. Lombez, M. Jubault, P. Benaben, Ecole Nationale Supérieure des Mines de Saint Etienne, FR
4:05Ink-jet printing of functional ceramic coatings and patterns starting from aqueous inks
J. Feys, M. Arin, K. de Keukeleere, J. de Roo, G. Pollefeyt, P. Lommens, I. Van Driessche, Ghent University, BE

Special Symposium

Technologies supported by inkjet printing are increasing. Smaller droplets and functional fluids are important drivers of this growth. The Nanotech 2013/Microtech 2013 Inkjet Symposium has a Call for Papers for a broad spectrum design-to-application event so that scientists can report their findings in this technology growth area. This symposium is targeted towards enhancing the basic understanding of the functional principles of inkjet with respect to research, design and manufacturing. We are looking for papers that describe both the challenges and successes associated with ink jet printhead development and the challenges and successes with functional printing applications. More specifically, applications within the fields of printed electronics, the nanosciences and the biosciences will be covered.


Topics & Application Areas

  • Inkjet Design
  • Drop formation physics, characterization
  • Surface wetting
  • Nanomaterials
  • Functional materials
  • Biomaterials applications
  • Fluid delivery
  • Novel inkjet applications
  • Other

Technical Abstract Submission

Please first review the information for authors as well as the abstract preparation guidelines.


Journal Submissions

Nanoparticle Research

Journal of Nanoparticle Research

Selected Nanotech Proceedings papers will be reviewed and invited into a Special Issue of Journal of Nanoparticle Research. The journal disseminates knowledge of the physical, chemical and biological phenomena and processes in nanoscale structures.

For consideration into this Special Issue of Journal of Nanoparticle Research, please select the “Submit to Journal of Nanoparticle Research” button during the on-line submission procedure.

Sensors & Transducers

On-line Journal ‘Sensors & Transducers’

Selected proceedings papers in the Electronics and Microsystems Track (MEMS & NEMS, Sensors & Systems, Micro & Nano Fluidics symposia, and MSM conference) will be reviewed and invited into a Special Issue of the on-line journal ‘Sensors & Transducers’.

For consideration into this Special Issue of the on-line journal ‘Sensors & Transducers’, please select the “Submit to Sensors & Transducers” button during the on-line submission procedure.


Sponsor & Exhibitor Opportunities

 Exhibit and Showcase
 Become a Sponsor

Please contact: Denise Lee

TechConnect Acceleration Partners:

Ingersoll Rand
Lockheed Martin
Procter And Gamble

In Partnership with


Sponsorship Opportunities: Contact Denise Lee

Free Subscription