Inkjet Design, Materials & Fabrication

Inkjet Design, Materials & Fabrication

Symposium Co-Chairs

Chris MenzelChris Menzel
Dimatix, Inc.

Confirmed Invited Speakers

Mark  BradleyMark Bradley
Professor of High-Throughput Chemical Biology
University Edinburgh, United Kingdom
Brian  DerbyPrinting Nanoparticle Suspensions: Feature Resolution and Defects
Brian Derby
Professor of Materials Science, The University of Manchester, United Kingdom

Symposium Sessions

Tuesday June 19

12:30 Networking Lunch - Expo
4:30 Expo Reception and Poster Session I (4:30 - 6:30)

Wednesday June 20

8:30 Inkjet Design, Materials & Fabrication: Keynotes
11:00 Inkjet Design, Materials & Fabrication II
12:30 Networking Lunch - Expo
1:00 NNI - Director’s Networking Session, National Nanotechnology Coordination Office
1:30 Exhibit and Poster Session II
 Inkjet Design, Materials & Fabrication
5:30 TechConnect Innovation Showcase Reception
6:00 CTSI Utility Technology Challenge Awards and Reception

Thursday June 21

10:00 National Nanotechnology Initiative Triennial Review
12:30 National Innovation Showcase - Networking Lunch (available for purchase)
4:00 TechConnect National Innovation Showcase, Reception & Poster Session III

Symposium Program

Tuesday June 19

↑ Back to Top
12:30Networking Lunch - ExpoExpo Hall AB
↑ Back to Top
4:30Expo Reception and Poster Session I (4:30 - 6:30)Expo Hall AB

Wednesday June 20

↑ Back to Top
8:30Inkjet Design, Materials & Fabrication: KeynotesRoom 207
Session chair: Chris Menzel, Dimatix, US
8:30Printing Nanoparticle Suspensions: Feature Resolution and Defects
B. Derby, University of Manchester, UK (bio)
9:00Analysis and Measurement of Ink Media Interactions in Inkjet Printing
R. Sharma, E. Bedford, B. Brys, K.T. Viswanath, E.P. Furlani, Cabot Corporation, US
9:20Multi-functional silica microdot arrays by inkjet printing for biosensor applications
O. De Los Cobos, M. Lejeune, F. Rossignol, C. Carrion, C. Boissière, F. Ribot, C. Sanchez, X. Cattoën, M. Wong Chi Man, J.-O. Durand, SPCTS, FR
9:40Photo-induced Surface Modification of Polyimides for Printable Electronics Fablication
T. Yamashita, F. Kodara, M. Mino, Y. Matsuzawa, K. Okano, Tokyo University of Science, JP
↑ Back to Top
11:00Inkjet Design, Materials & Fabrication IIRoom 207
Session chair: Chris Menzel, Dimatix, US
11:00The effect of Rheological Property of Ink on the Generation of Inkjet Droplet
H. Yoo, C. Kim, Korea University, KR
11:20Measurement of liquid properties by the observation of micro droplet emitted by inkjet
T. Yamada, K. Sakai, Institute of Industrial Science, the University of Tokyo, JP
11:40CANCELED - Segmented inkjet print head experiment
M. Einat, Ariel University Center of Samaria, IL
↑ Back to Top
12:30Networking Lunch - ExpoExhibit Hall AB
↑ Back to Top
1:00NNI - Director’s Networking Session, National Nanotechnology Coordination OfficeExhibit Hall A
↑ Back to Top
1:30Exhibit and Poster Session IIExhibit Hall AB
↑ Back to Top
Inkjet Design, Materials & Fabrication
-Photocurable Composite with Antimicrobial Activity for Wound-Healing
M.-H. Chang, F.-C. Ding, W.-Y. Ju, P.S. Lai, National Chung Hsing University, TW
-Additive Manufacturing (AM) of Quantum Dot Nano-Inks
O.S. Ivanova, A. Elliott, T.A. Campbell, C.B. Williams, Virginia Tech, US
-Low-temperature laser sintering of the printed nano-silver electrodes for flexible electronics
W. Gu, J. Lin, Z. Cui, Suzhou Institute of Nanotech, Chinese Academy of Sciences, CN
-The Effect of Surface Treatment on The Line Formation of Inkjet-Printed Silver Nanoparticles
Y.J. Moon, H.S. Kang, K.T. Kang, S.H. Lee, S.J. Moon, J.Y. Hwang, Korea Institute of Industrial Technology(KITECH), KR
-FineMetalLine Patterning on Hydrophilic Non-Conductive SubstratesBased on EHD Printing withLaser Sintering
S. Son, S. Lee, Y-J Kim, K. An, J. Choi, Sungkyunkwan University, KR
-High Aspect Ratio EHD Printing with High Viscosity Ink Ejection
J. Choi, S. Lee, Y-J Kim, S.U. Son, K.C. An, Sungkyunkwan University, KR
-InkJet Printing Optimization of Silver Nano-Ink for Printing Solar Electrodes using Industrial Printheads
R. Shankar, K.W. Whites, South Dakota School of Mines and Technology, US
↑ Back to Top
5:30TechConnect Innovation Showcase ReceptionExpo Hall CD
↑ Back to Top
6:00CTSI Utility Technology Challenge Awards and ReceptionExpo Theater 1
Session chair: Patti Glaza, Arsenal Venture Partners, US

Thursday June 21

↑ Back to Top
10:00National Nanotechnology Initiative Triennial ReviewGreat America 1
Session chair: Erik Svedberg, National Materials and Manufacturing, National Academies, US
10:00NNI Town Hall Meeting
E. Svedberg, National Nanotechnology Initiative, US
↑ Back to Top
12:30National Innovation Showcase - Networking Lunch (available for purchase)Expo Hall CD
↑ Back to Top
4:00TechConnect National Innovation Showcase, Reception & Poster Session IIIExpo Hall CD

Special Symposium

Technologies supported by inkjet printing are increasing. Smaller droplets and functional fluids are important drivers of this growth.The Nanotech2012/Microtech2012 Inkjet Symposium has a Call for Papers for a broad spectrum design-to-application event so that scientists can report their findings in this technology growth area. This symposium is targeted towards enhancing the basic understanding of the functional principles of inkjet with respect to research, design and manufacturing. We are looking for papers that describe both the challenges and successes associated with ink jet printhead development and the challenges and successes with functional printing applications. More specifically, applications within the fields of printed electronics, the nanosciences and the biosciences will be covered.

Specific attention will be paid to the physical chemistry of the inkjet process:

  • Physical Chemistry of fluids including capillary forces and wetting
  • Fluid interactions with internal features of printhead
  • Fluid interactions at the printhead nozzle/air interface
  • Substrate-fluid interactions post-printing
  • Fluid Properties
  • Newtonian fluids
  • Non-Newtonian fluids
  • Particle size and distribution
  • Solvent properties

These subjects form the backdrop for discussing how fluid formulators manipulate the chemistry or physics of fluids to get droplet formation, adhesion to the substrate and behavior of the fluid droplets at the substrate surface. The ability to make a functional device due to the success of these parameters will also be discussed.

Authors are invited to submit papers that address theoretical, analytical, experimental and practical treatments of the topics below.

Topics & Application Areas

  • Inkjet Design
  • Drop Formation physics, characterization
  • Drop break-off
  • Satellite formation
  • Drop straightness
  • Drop size
  • Surface wetting
  • Functional materials
  • Biomaterials
  • Conductive materials
  • PEDOT
  • Nanoparticles
  • Polymers
  • Inkjet
  • Printheads
  • Materials printing
  • Fluid delivery
  • Other

Journal Submissions

Experimental Nanoscience

Journal of Experimental Nanoscience

Selected Nanotech Proceedings papers will be reviewed and invited into a Special Issue of the Journal of Experimental Nanoscience. The journal provides a showcase for advances in the experimental sciences underlying nanotechnology and nanomaterials.

For consideration into this Special Issue of the Journal of Experimental Nanoscience, please select the “Submit to Journal of Experimental Nanoscience” button during the on-line submission procedure.

Nanoparticle Research

Journal of Nanoparticle Research

Selected Nanotech Proceedings papers will be reviewed and invited into a Special Issue of Journal of Nanoparticle Research. The journal disseminates knowledge of the physical, chemical and biological phenomena and processes in nanoscale structures.

For consideration into this Special Issue of Journal of Nanoparticle Research, please select the “Submit to Journal of Nanoparticle Research” button during the on-line submission procedure.

Sensors & Transducers

On-line Journal ‘Sensors & Transducers’

Selected proceedings papers in the Electronics and Microsystems Track (MEMS & NEMS, Sensors & Systems, Micro & Nano Fluidics symposia, and MSM conference) will be reviewed and invited into a Special Issue of the on-line journal ‘Sensors & Transducers’.

For consideration into this Special Issue of the on-line journal ‘Sensors & Transducers’, please select the “Submit to Sensors & Transducers” button during the on-line submission procedure.

 

Sponsor & Exhibitor Opportunities

 Exhibit and Showcase
 Become a Sponsor

Please contact: Denise Lee


Program Tracks

MEMS & Microsystems
Medical & Biotech
Design, Fabrication & Characterization
Business & Partnering

2012 TechConnect Corporate Acceleration Partners:

AC-NET
Applied Materials
Austin_Energy
BASF
BayerMaterialScience
bp
ConstellationEnergy
DOW
Fraunhofer TechBridge
Hitachi
Honda
IBM
Kauffman Foundation
Kodak
Lam
Lockheed Martin
MWV
nationalgrid
NortheastUtilities
novaris
Panasonic
PPG
Samsung
schlumberger
Shell_GameChanger
siemens
SK Innovation
SouthernCalEdison
Toray


In Partnership with

NSTI


Sponsorship Opportunities: Contact Denise Lee

Free Subscription

E-mail: