Advanced Manufacturing

Confirmed Invited Speakers

William B.  BonvillianAn Innovation-Driven Strategy for Advanced Manufcturing
William B. Bonvillian
Director, MIT, Washington Office
Robert W. IvesterAddressing U.S. Advanced Manufacturing and Clean Energy Technology Challenges
Robert W. Ivester
Acting Director, DOE Advanced Manufacturing Office
Jyoti  Dalvi-MalhotraChemical manufacturing challenges of advancing micro- and nanoelectronic technologies into mass production
Jyoti Dalvi-Malhotra
Senior Scientist, Brewer Science, Inc.

Advanced manufacturing enables rapid transfer of science and technology into manufacturing products and processes. It is particularly pertinent for technologically complex products and commercialization of advanced materials such as those highlighted at TechConnect World. This symposium focuses on challenges and success stories in technology development and provides a forum which highlights exciting new approaches to advanced manufacturing.

Symposium Sessions

Monday June 16

11:00Advanced Manufacturing Keynotes
1:30Sustainable Nanomanufacturing I
Advanced Manufacturing - Posters 4:30

Tuesday June 17

10:30Innovation Spotlights: Advanced Materials: MeadWestvaco & DuPont
10:30Sustainable Nanomanufacturing II
1:30Innovation Spotlights: Energy: Shell & United Technologies
3:00Innovation Spotlights: Defense: Boeing, Aerojet & General Atomics

Symposium Program

Monday June 16

↑ Back to Top
11:00Advanced Manufacturing KeynotesNational Harbor 5
Session chair: Fiona Case, NSTI, US (bio)
11:00An Innovation-Driven Strategy for Advanced Manufcturing (invited presentation)
W.B. Bonvillian, MIT Washington Office, US (bio)
11:25Addressing U.S. Advanced Manufacturing and Clean Energy Technology Challenges (invited presentation)
R.W. Ivester, DOE EERE Advanced Manufacturing Office, US (bio)
11:50Chemical manufacturing challenges of advancing micro- and nanoelectronic technologies into mass production (invited presentation)
J. Dalvi-Malhotra, Brewer Science, Inc., US
12:153D printing: How emerging materials, applications, and business models will disrupt manufacturing and enhance future innovation
A.C. Vicari, Lux Research, US
↑ Back to Top
1:30Sustainable Nanomanufacturing INational Harbor 2
Session chair: Ahmed Busnaina, NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (bio)
1:30Frontiers of Nanomanufacturing (invited presentation)
J.A. Liddle, National Institute of Standards and Technology, US (bio)
1:55The 2014 NCMS-NSF Survey of Nanotechnology in the U.S. Manufacturing Industry
M. Mehta, National Center for Manufacturing Sciences (NCMS), US
2:15Nanomanufacturing: The Making of the Materials Revolution (invited presentation)
T. Earles, Lockheed Martin Corporation, US (bio)
2:40Nanoscale Offset Printing (invited presentation)
A. Busnaina, NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (NSEC), Northeastern University, US (bio)
3:30Continuous Extrusion Process for Preparation of Polymer Nanocomposites
J.D.M. Shearer, C.M.F. Barry, J. Mead, University of Massachusetts Lowell, US
3:05TBA (invited presentation)
M. Lilly, Northrop Grumman Corporation, US (bio)
3:50Environmental Net Benefit of Quantum Dot Components for Displays (invited presentation)
S. Coe-Sullivan, QD Vision, US (bio)
↑ Back to Top
Advanced Manufacturing - Posters 4:30Expo Hall C
-IMEC: Prototyping and Manufacturing of innovative components and microsystem product solutions. Innovation through partnership
R. Borzi, imec, US
-A Clean and Green Route for the production of methacrylic acid and methacrolein from biofuel
M.M. Lin, J. Grinberg, W. Eng, EverNu Technology, LLC, US
-Investigation on Accelerated Ageing Techniques for IC Interconnect Structures in Context of Multicriterial Optimization of 3D SiP Design Flow
G. Janczyk, T. Bieniek, Instytut Technologii Elektronowej, PL
-Autonomous Nanosensor System for Monitoring and Quantifying Arsenic in Water
S. Salinas, N. Mosquera, L. Yate, E. Coy, G. Yamhure, E. González, Pontificia Universidad Javeriana, CO
-Direct Integration of Ni2Si/Si Nanograss Heterojunction Array on the Gate Terminal of N-MOSFET Utilizing a CMOS Compatible Top-Down Technique
H. Taghinejad, M. Ganji, A. Rostamian, M. Taghinejad, M. Abdolahd, S. Mohajerzadeh, H. Tghinejad, university of tehran, IR
-Hermetic Bonding in Single Device Medical Implants, Night Vision Goggles, Marine Sensors Via Wet Nanobonding™ at T< 200°C of Si/Sio2
K. Leaming, S.D. Whaley, N. Herbots, R.B. Bennett-Kennett, C.F. Watson, E.R.C. Morgan, R.J. Culbertson, R.L. Rhoades, S.N. Drews, J.D. Bradley, D.A. Sell, P. Rez, B.J. Wilkens, M.W. Mangus, H.M. Johnson, Arizona State University/SiO2 NanoTech, LLC, US
-ALD Tools for Thin-film Coated Particle Development and Production
K. Buechler, J.A. Spencer II, ALD NanoSolutions, Inc., US

Tuesday June 17

↑ Back to Top
10:30Innovation Spotlights: Advanced Materials: MeadWestvaco & DuPontNational Harbor 3
Session chair: Thomas Martinuzzo, Univalor, CA
10:30MeadWestvaco - Strategic Innovation Interests
P. France, MeadWestvaco, US
10:45DuPont - Strategic Innovation Interests
B. Provine, DuPont, US
11:00Nano-Enhanced Hydrophobic Surfaces
H. Malak, AES, Inc., US
11:07Rapid Synthesis of Titanate Nanofibers
A. Kundu, Lehigh University, US
11:14High throughput ALD
P. Lichty, Pneumaticoat Technologies, US
11:21Tailored Thermal Expansion Alloys
J. Monroe, Texas A&M University, US
11:28MeadWestvaco, DuPont Q&A
↑ Back to Top
10:30Sustainable Nanomanufacturing IIChesapeake 7-9
Session chair: James Alexander Liddle, NIST; Michael Meador, NASA
10:30Graphene Ready For Prime Time (invited presentation)
J. Lettow, Vorbeck Materials, US (bio)
10:55Advancements in Microelectronics-Grade Carbon Nanotube Materials for NRAM® Device Manufacture and Analysis of Carbon Nanotube Mass in End User Devices (invited presentation)
J.E. Lamb, S. Gibbons, R. Trichur, Y. Jiang, K. Mangelson, K. Kremer, D. Janzen, Brewer Science, Inc, US
11:20TBA (invited presentation)
D. Arthur, SouthWest NanoTechnologies, Inc., US (bio)
11:45Industrialization of Boron Nitride Nanotubes: From Synthesis to Applications
K.S. Kim, M.B. Jakubinek, A. Hrdina, Y. Martinez-Rubi, B. Ashrafi, M. Plunkett, S. Lin, S. Denommee, C.T. Kingston, B. Simard, National Research Council Canada, CA
12:05Fluidic Devices for Nanoparticle Manufacturing (invited presentation)
S.M. Stavis, National Institute of Standards and Technology (NIST), US (bio)
↑ Back to Top
1:30Innovation Spotlights: Energy: Shell & United TechnologiesNational Harbor 3
Session chair: University of Waterloo, CA
1:30Shell GameChanger - Strategic Innovation Interests
M. Marino, Shell GameChanger, US
1:45United Technologies - Strategic Innovation Interests
C. Walker, United Technologies, US
2:00Solar Thermochemical Reactor – Efficient Production of Fuels from Sunlight
L. Besemann, University of Minnesota, US
2:07Metabolic Engineering of Anaerobic Fungal Pathways for the Production of Biofuels and Antimicrobial Compounds
D. Lozofsky, UCSB Office of Technology & Industry Alliances, US
2:14Manufacture of aluminum nanoparticles for increasing energy density in fuels
A. Adkins, University of Central Florida, US
2:21Novel CIGS/CdS Thin Film Solar Cells Using Selenium Precursor
R. Nagaiah, University of Central Florida, US
J. Ornstein, SynShark LLC, US
2:35MoMeCCA - Moist membranes for the Cultivation and Collection of Algae
T. Vail, Northern Arizona University, US
2:42Shell, United Technologies Q&A
↑ Back to Top
3:00Innovation Spotlights: Defense: Boeing, Aerojet & General AtomicsNational Harbor 3
Session chair: Lynn Foster, BPT Pharma, US
3:00Boeing - Strategic Innovation Interests
M. Price, Boeing, US
3:15Aerojet - Strategic Innovation Interests
J. Drakes, Aerojet, US
3:30General Atomics - Strategic Innovation Interests
M. Maughan, General Atomics, US
3:45A Novel Decontamination Process for Powders for Transparent Ceramics
A. Kunda, Lehigh University, US
3:52Hi-powered Ram Air Turbine, (HiRAT)
J. Justak, ATGI, US
M. Fox, Spectral Sciences Inc., US
4:06Boeing, Aerojet, General Atomics Q&A

Topics & Application Areas

  • New industrial platform technologies
  • Sustainable and green processes
  • High performance computing
  • Robotics and automation
  • High precision technologies
  • Other

Sponsor & Exhibitor Opportunities

 Exhibit and Showcase
 Become a Sponsor

Please contact: Chris Erb

TechConnect Acceleration Partners:

Lockheed Martin

In Partnership with


Sponsorship Opportunities: Contact Chris Erb

Free Subscription